Stainless Steel Butterfly Valve
Description of Stainless Steel Butterfly Valve:
ZECO stainless steel butterfly valve is a kind of butterfly valve with high performance and long service life. It is mainly composed of driving device and stainless steel parts. The valve body, butterfly disc and inner parts are made of stainless steel. Although stainless steel butterfly valve is produced with high quality materials, if the installation is not proper, no matter how good the material is, it will cause problems or have worse effect than the product of ordinary material with good maintenance. So valve installation is the key factor to affect valves’life-extension. Mal installation will reduce the valve performance. So following instructions shall be confirmed before installation.(a)Carefully unpacking the cases, read the material, specification, tags and so on to make sure the valve is qualified to install; (b) Do pay attention to the warnings on a valve tag, and following instructions; (c)Check the flow direction mark, if the valve is marked with flow direction, valve must be installed as per this direction; (d)Check to find if the valve tunnel is clean, safe and without any corrosive substances. Get rid of packing and stuffing which blocks movement of a valve; (e)Check if piping to connect valve are clean. If not, clean before installation.ZECO is one of the leading ss butterfly valves suppliersin China.
Features of Stainless Steel Butterfly Valve:
- SSbutterfly valvecombines the three offsets of the seating surface with the flexibility of graphite lamination to achieve a tight and uniform seal with a low required torque;
Material of Stainless Steel Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A351 CF8 |
|
2 |
Seal Ring |
Graphite + SS304 |
|
3 |
Retainer Flange |
ASTM A182 F304 |
|
4 |
Pin |
ASTM A276 304 |
|
5 |
Disc |
ASTM A351 CF8 |
|
6 |
Stem |
ASTM A276 304 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS304 + PTFE |
|
9 |
Bolt |
ASTM A193 B8 |
|
10 |
Nut |
ASTM A194 8 |
|
11 |
Yoke |
ASTM A216 WCB |
Send product request
Other supplier products
 |
High Pressure Shut-off Valve | Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the ... |
 |
Double Orifice Air Release Valve | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... |
 |
Control Valve | ZhengFengbalanced trim control valves are widely used in water supply and drainage control systems in the global building market. As one of the ... |
 |
4 Inch Gate Valve | Description of 4 Inch Gate Valve: ZECO 4 flanged gate valveis one of the most commonly used calibers. Gate valve in the line just switch effect, lo... |
 |
Floating Ball Valve | Description of Floating Ball Valve: ZECO floating ball valve has two seats supporting the ball. Under medium pressure, the ball can be pressed tigh... |
Same products
 |
Combination angle valve | Seller: Zhejiang Huaqi Information Technology Co., LTD | Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ... |
 |
Multifunctional hydraulic control valve | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:... |
 |
Fire Protection Grooved Butterfly Valve | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Code：D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12... |
 |
Dry Ash Gate Valve | Seller: China Valve Industry Co., Ltd. | The dry ash gate valve is designed for both inlet and outlet pipelines. It features... |
 |
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur... |
