.

4 Inch Butterfly Valve

Description of 4 Inch Butterfly Valve:

ZECO 4 flanged butterfly valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly valve is the most commonly used size on small pipelines, so there is a problem of stocking. Problems when stocking is almost the same with preparation of delivery. Time is the key factor, usually gate valve stocking period is decided by its sealing material. If the valve has to be stocked for several weeks or months, better stocking conditions are needed. Valve is usually stocked indoor and its stocking ambient temperature shall be higher than dew point. If valves are stocked outdoor, support the valve to make sure it does not contact the earth, at the same time, water-proof cover shall be added to the valve.

Features of 4 Inch Butterfly Valve:

  1. ZECO 4 inch butterfly valve are easily maintained. At any time pay attention to the sealing surface and shaft seal, When the sealing surface has abrasion or leakage, Generally, use the pressed seal of the screw plate to resolve, when the leakage occurred in the larger, the inner ring can be adjusted plus-one-chip be resolved, if there is damage to seals, plate seals can be removed, the replacement of seals, when the seal leakage, adjust packing gland or seal ring replacement;
  2. The Double offset design of ZECO 4 inch butterfly valve is less abrasion, excellent sealing capacity;
  3. The limit switch device of ZECO 4 inch butterfly valve ensure right position of open / close;
  4. The body, disc and stem of ZECO 4 inch butterfly valve have sufficient strength and flexibility, sealing can be changed inside the valve.

Material of 4 Inch Butterfly Valve:

No

Part

Material

1

Body

ASTM A216 WCB + 13Cr

2

Seal Ring

Graphite + SS304

3

Retainer Flange

ASTM A182 F304

4

Pin

ASTM A276 304

5

Disc

ASTM A351 CF8

6

Stem

ASTM A276 304

7

Stem Packing

Graphite

8

Stem Beating

SS304 + PTFE

9

Bolt

ASTM A193 B7

10

Nut

ASTM A194 2H

11

Yoke

ASTM A216 WCB

As a zeco valve group co ltd, ZECO always adhere to exceed customer expectations, to provide customers with more value-added.services and products as the ultimate goal.

ZECO Valve Group is established in 1991, as a industrial valve manufacturer in Shanghai, China. We have 5 valve factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly produce and supply wedge gate valves, through conduit gate valves, floating ball valves, trunnion mounted ball valves, globe valves, swing check valves, swing check valves, dual plate check valves and forged steel valves. Valve sizing 1/2" to 88", rating 150LB through 2500LB, served covering oil, gas, chemical, energy, refinery, LNG, LPG and many other fields. With the growing need, ZECO Valve factorydeveloped our own laboratory for research & development for international standard valve design innovation and vertification, which includes PT, MT, UT, FE test. ZECO Valve Group is a humble and united team, to be more diligent and progressive to show the itegrity to our clients.



Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Butterfly Valve
Butterfly Valve ZECO Valve Groupis a humble and united team, to be more dilligent and progessive to show the itegrity to our clients, ZECO gate valveisdesigned wit...
Dirt Separator
Dirt Separator Basic informationThis valve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the cavity body;3. Dirt...
6 Inch Ball Valve
6 Inch Ball Valve Description of 6 inch valve: ZECO group valveis a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been produci...
Swing Check Valve
Swing Check Valve What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th...
Pressure Control Valve
Pressure Control Valve Pressure control valves use the balancing principle of hydraulic pressure and spring force to adjust the pressure of the hydraulic system and contr...
All supplier products

Same products

Combination angle valve
Combination angle valve Seller: Zhejiang Huaqi Information Technology Co., LTD Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ...
Multifunctional hydraulic control valve
Multifunctional hydraulic control valve Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:...
Fire Protection Grooved Butterfly Valve
Fire Protection Grooved Butterfly Valve Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD Features: Code:D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12...
Dry Ash Gate Valve
Dry Ash Gate Valve Seller: China Valve Industry Co., Ltd. The dry ash gate valve is designed for both inlet and outlet pipelines. It features...
China factory High temperature double head bolt 2-8UN Steam Turbine RSV N for power station
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur...