DMF-Z Right Angle Electromagnetic Pulse Valve
DMF-Z Right Angle Electromagnetic Pulse ValveProduct introduction:
The electromagnetic pulse valve is imported from abroad (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag filter dust cleaning system is controlled by the output signal of the pulse injection controller, and the filter bag is cleaned by the row (chamber). Ash, so that the dust collector's resistance is maintained within the set range, in order to ensure that the dust collector processing capacity and vacuum efficiency.
DMF-Z Right Angle Electromagnetic Pulse Valve Features:
The DMF-Z electromagnetic pulse valve is a right-angle valve. The angle between the inlet and outlet is 90°. It is suitable for the mounting connection between the helium cylinder and the dust blower tube. The gas flow is unobstructed, and it can provide the turbulent gas flow that meets the requirements.
DMF-Z Right Angle Electromagnetic Pulse Valve working principle:
The diaphragm divides the electromagnetic pulse valve into two air chambers, front and rear. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the air chamber presses the diaphragm against the output of the valve. The pulse valve is in the "closed" state.
The electric signal of the pulse injection controller causes the electromagnetic pulse valve armature to move, the air chamber vent hole opens after the valve, the rear chamber quickly loses pressure, the diaphragm moves back, the compressed air is blown through the valve outlet, and the electromagnetic pulse valve is "opened" status.
Pulse injection control instrument electrical signal disappeared, electromagnetic pulse valve armature reset, after the air chamber vent hole closed, the rear chamber pressure increased so that the diaphragm close to the valve output, the electromagnetic pulse valve is in the "closed" state.
If you are looking for diaphragm pulse valve manufacturers, Senotay can be a competitable one among those diaphragm valve suppliers. Contact us to get more information about our products!
Send product request
Other supplier products
 |
DMC Pulse Jet Single Bag Dust Collector | Single-pulse bag filter is widely used in mining, electric furnace smelting, machinery manufacturing, chemical products, cement, building materials... |
 |
Cyclone Separation Dust Collector | Multi cyclone dust collector design CLK Diffusion Cyclone Dust Collector CLK diffusion cyclone dust collector is suitable for supplementing dry non... |
 |
Electrostatic Dust Collector | The working principle of the electrostatic dust collectoris to use the high voltage electric field to ionize the flue gas. The dust charge in the a... |
 |
KWD/RD Wide-Space Electrostatic Precipitator | KWD/RD space electrostatic precipitator uses high-voltage DC electric field to make the dust particle charge in the dust-containing gas to deposit ... |
 |
Tube Screw Conveyor | Small Screw Conveyor for Sale The tubular small screw conveyoris the main unit of the mechanized transportation work in all sectors of industry ... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
