Combination Air Valve
Festures of combination air release vacuum valve
Suction at negative pressure；
Fast exhaust；
Exhaust only does not drain；
Slightexhaustand large.
Combination Air Valve Working Principle
When tube began to water injection, the disc in the open position, a large number of exhaust, when the air line up, the full of water in the valve, floating ball up and drive the check valveclosed, stop the exhaust, when water tube is normal transportation, if there is a small amount of air within the valve to a degree, water levels fall in the valve, floating ball drops, the air is being exhausted from the holes. When the pump stops, the water flow in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug is opened quickly and the air is inhaled to ensure the safety of the pipe.
Combination Air Valve Installation and Commissioning
This valve and gate groupis usually installed at the highest point of the system, such as tightening the bonnet on the valve body, theair valvestops the exhaust, normally, the bonnet should be open.Air valvecan also be used with the block valve, convenient exhaustvalvemaintenance. For specific use, please consult ZECO Valve Group.
Combination Air Valve Material and Standard
Size Range: 2"~8"Pressure
Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Exhaust Hood |
Ductile Iron |
EN 1563/DIN 1693 |
|
Float Ball |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Strainer |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seal |
EPDM / NBR |
ISO 4633 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
Send product request
Other supplier products
 |
Pump Control Valve | Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small flui... |
 |
Gear Operated Ball Valve | Description of Gear Operated Valve: Large size ball valve if adopt manual operation will reduce the efficiency of personnel, even if many people h... |
 |
Backflow Preventers | Festures of Backflow Preventers The double check valve is designed as a whole, with small structure； Body is streamlined with little resistance l... |
 |
Lug Butterfly Valve | Features of Lug Butterfly Valve Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inle... |
 |
3 Inch Butterfly Valve | Description of 3 Inch Butterfly Valve:ZECO 3 inch butterfly valve/butterfly valve 3 inchis a small diameter butterfly valve, usually manually opera... |
Same products
 |
China Gate valve | Seller: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... |
 |
Gate Valve Vs. Ball Valve | Seller: Yuanda Valve Group Co.,Ltd. | Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used... |
 |
Non Return Valve Suppliers China | Seller: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... |
 |
Common Types Of Check Valves | Seller: Yuanda Valve Group Co.,Ltd. | Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ... |
 |
Brass ball valve | Seller: Yuanda Valve Group Co.,Ltd. | Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia... |
