Lug Butterfly Valve
Features of Lug Butterfly Valve
Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inlet and outlet of the disc are roughly balanced;
Self lubricating bearing to reduce operating torque and avoid locking the valve stem infrequent opening and closing conditions;
Better Seal ring material, seal is made of stainless steel sheet with graphite/carbon fiber/PTFE, etc. More wear-resistant, impact-resistant, reliable, and environmentally friendly than rubber asbestos sheet material;
Packing-combined sealing system, ensure that the maximum leakage of the valve can reach ≤20ppm. The dynamic sealing structure can be used if necessary so that the packing seal is in good condition and the free maintenance period of the packing is extended.
Lug Butterfly Valve Working Principle
Full lug type butterfly valve has two options of fixed seat and floating seat, which can be repaired without leaving the site, which can shorten the repair time and greatly improve the efficiency. Fixed seats are suitable for valves where the medium flows forward, so the seal is only for one direction and the flow direction should be noted when installing. Although the valve seat is fixed, the sealing of the valve flap can still be removed. If the valve has a floating seat, it can be installed in any direction.
Lug Type Butterfly Valve Installationand Commissioning
Wafer lug type butterfly valveshould be stored in a dry, ventilated room, and the valve channel should be blocked at both ends. Long-term storage of the valve should be regularly inspected and cleared of dirt. Special attention should be paid to the cleaning of the sealing surface to prevent damage to the sealing surface. For specific use, please consult Zeco Valve Group.
Lug Butterfly Valve Material and Standard
Size Range: 2"~48"
Pressure Rating: 150LB ~ 300LB
Face to Face Dimensions: API 609, EN558
Flange End Dimension: EN1092, ASME B16.5, ASME B16.47, AS2129
Inspection and Test: API 598
|
Part |
Material |
Standard |
|
Body |
GGG40/WCB/CF8M/MONEL |
ASTM STANDARD |
|
Disc |
GGG40/WCB/CF8M/MONEL |
ASTM STANDARD |
|
Stem |
SS420/SS410/SS316/MONEL |
ASTM STANDARD |
|
Seat |
HARD SEAL/PTFE/GRAPHITE |
ASTM STANDARD |
|
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys. |
||
As a china valve manufacturer, we have types of related products for sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p... |
 |
Gate Valve | ZECO is one of the professionalgate valve manufacturing companies, specializing in the production of wedge gate valve and through conduit gate valv... |
 |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... |
 |
Flanged Concentric Butterfly Valve | Basic informationThis Flanged is used in various service and drain lines as truncation and regulating equipment.Features1. Bidirectional sealing, n... |
 |
Resilient Seated Gate Valve | Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movabl... |
