.

High Pressure Shut-off Valve

Basic information of High Pressure Shut-off Valve

This valve is closed after the fire pump is started to cut off the domestic water and ensure the firefighting water. When the fire pump is closed, the valve automatically opens to cut off the firefighting water and restore the domestic water supply system. Dof960 series of cases

Features of High Pressure Shut-off Valve

  1. 2. Sensitive induction, quick control3. Completely Automatic Operation4. Save on plumbing and water costs

Principle of High Pressure Shut-off Valve

The pilot valve is opened when the inlet pressure of the main valve is lower than the set pressure of the pilot valve. The main valve opens and water flows out through the main valve through the outlet. When the firefighting pump starts or frequency conversion pump pressure increases, exceeding the set pressure of the pilot valve, the pressure of the main valve inlet guide valve is increased, the pressure acting on the spring is increased, the pressure is pressed down, the pilot valve is closed. At this point, the inlet pressure of the main valve is continuously supplemented to the control room of the main valve through the ball valve. The downward pressure on the valve disc is greater than the upward thrust to close the main valve.

Installation and Commissioning of High Pressure Shut-off Valve

Piping should be cleaned before using. When the inlet pressure is less than the set pressure, the valve is always open, if the inlet pressure is greater than the set pressure, the valve is closed. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron

EN 1563/DIN 1693

Trim

Stainless Steel 431

EN10088-1/ASTM A959

Seat

Stainless Steel 431

EN10088-1/ASTM A959

Diaphragm

EPDM / NBR

ISO 4633

Pilot Valve

Stainless Steel 431

EN10088-1/ASTM A959

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope , Standards & Materials of High Pressure Shut-off Valve

Size Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy Coating Inspection and Test: ISO 5208 / EN 12226-2

Zhengfeng Valve Group Co., Ltd. is a professional water valve suppliers. We provide Balancing Valve, high pressure valve china, shut off control valve, pressure shut off valve, high pressure shut off valve, control valveand so on. Want to know more? Please contact us.



Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Electric Ball Valve
Electric Ball Valve Categories: Ball Valve, Ball Valve By Drive Mode, Forged Ball Valve Tags: Ball Valve Electric, Electric Actuated Ball Valve, Electric Actuator Bal...
Triple Offset Butterfly Valve
Triple Offset Butterfly Valve Here is the china double eccentric butterfly valve.To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage,...
Cast Steel Gate Valve
Cast Steel Gate Valve Description of Cast Steel Gate Valve: ZECO cast steel gate valve Chinais in controlled under the quality assurance system of production and manufa...
Lug Butterfly Valve
Lug Butterfly Valve Features of Lug Butterfly Valve Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inle...
Pump Control Valve
Pump Control Valve This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively...
All supplier products

Same products

Class 300 Valve
Class 300 Valve Seller: GangYe Group Co.,Ltd. Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
Class 3000 Industrial Valve
Class 3000 Industrial Valve Seller: GangYe Group Co.,Ltd. Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
Class 2500 Industrial Valve
Class 2500 Industrial Valve Seller: GangYe Group Co.,Ltd. Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
Class 150 Valve
Class 150 Valve Seller: GangYe Group Co.,Ltd. globe valve class 150is a pressure rating designation defined by standards organizations, such as...
Class 1500 Industrial Valve
Class 1500 Industrial Valve Seller: GangYe Group Co.,Ltd. A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...