Graphite electrode 450

• 
• 

Graphite electrode is mainly applied for metallurgy industry and calcium carbide, phosphor-chemical enterprise, such as iron and steel smelting, industrial silicon, yellow phosphorous ,ferroalloy, titania slag, brown fused alumina etc submerged-arc furnace melting production.

Typical Properties of Large-size Graphite Electrode.
Diameter:450mm
Length: 1800mm-2400mm
2500$-3200$ per ton
Pakage:wooden
Notice:
1. Electrodes should be stored in a clean and dry place avoiding vibration and collision. It should be dried before use .
2. When connecting the nipples, the user should clean the hole with compressed air and then screw the nipple into it carefully without damaging the threads.
3. Before the electrodes are connected, cleaning the electrode tip by the compressed air when the two electrodes are 20-30mm away.
4. When the electrodes are connected by the wrenches, it should be fully tightened to the specified location that the gap between the two electrodes is less than 0.05mm.
5. To avoid the electrode breakage, please keep away from the insulation material blocks.
6. To avoid the electrode breakage, place the aniseed block on the lower part and set the small block on the upper part.


Advantages about the Graphite Electrode :
The graphite electrode costs less electric energy and saves production cost, energy and the electricity consumption in per unit of steel-making.

Due to the fewer changing times of the graphite electrode, so it reduces the labor quantity, the risk coefficient of the operator and improves the production efficiency .

The graphite electrode is a kind of low consumption and low pollution product which has very important social significance in energy saving and environmental protection nowadays.

Notice:

1. Electrodes should be stored in a clean and dry place avoiding vibration and collision. It should be dried before use .

2. When connecting the nipples, the user should clean the hole with compressed air and then screw the nipple into it carefully without damaging the threads.

3. Before the electrodes are connected, cleaning the electrode tip by the compressed air when the two electrodes are 20-30mm away.

4. When the electrodes are connected by the wrenches, it should be fully tightened to the specified location that the gap between the two electrodes is less than 0.05mm.

5. To avoid the electrode breakage, please keep away from the insulation material blocks.

6. To avoid the electrode breakage, place the aniseed block on the lower part and set the small block on the upper part.
Our main products: we specially produce large-size graphite electrode and large-size carbon electrode, including Regular power graphite electrode(RP), High power graphite electrode(HP), ultra high power graphite electrode(UHP), high density impregnated graphite electrode, burner square graphite electrode, Calcined Petroleum Coke and various kinds and sizes carbon products. Our company owned the first class production equipment and outstanding management level, also we have strong technical force and advance tested equipment. We passed the ISO9001-2000 quality certification in 2006 and with annual production ability at 50000 tons.Typical Properties of Large-size Graphite Electrode
SPECIFICATION
Table 1: Technical Specification of UHP Graphite Electrode
Dia. Resistance Density FlexureStrength ElasticModulus AshContent CTE CurrentLoad CurrentDensity
(inch) (≤,µΩ·m) (≥,g/cm3) (≥,MPa) (≤,GPa) (≤,%) (100°C–600°C) (A) (A/cm2)
(≤,10-6/°C)
10 5.2 1.67 10.5 14 0.3 1.5 8100–12200 20–30
12 5.2 1.70 10.5 14 0.3 1.5 15000–22000 20–30
14 5.2 1.70 10.5 14 0.3 1.5 20000–30000 20–30
16 5.2 1.70 10.5 14 0.3 1.5 25000–40000 19–30
18 5.2 1.70 10.5 14 0.3 1.5 32000–45000 19–27
20 5.2 1.70 11 14 0.3 1.4 38000–55000 18–27
22 5.2 1.72 11 14 0.3 1.4 42000–66000 17–26
24 4.8 1.72 11 14 0.3 1.4 49000–76000 17–26
Table 2: Graphite Electrode Size & Tolerance
Diameter(mm) Length(mm)
NominalDiameter ActualDiameter NominalLength Tolerance ShortLength
(inch) (mm) (max.) (min.) (roughspot)
10 250 256 251 248 1600/1800 ±100 -275
12 300 307 302 299 1600/1800
14 350 357 352 349 1600/1800
16 400 409 403 400 1600/1800/2000/2200
18 450 460 454 451 1600/1800/2000/2200
20 500 511 505 502 1800/2000/2200/2400
22 550 562 556 553 1800/2000/2200/2400
24 600 613 607 604 2000/2200/2400/2700

Other supplier products

	Graphite carbon plate	Our factory provides graphite carbon plate, which has the characteristics of wear resistance, temperature resistance, pressure resistance, corrosio...
	UHP graphite electrode 450	The graphite electrode is made from the raw materials of high quality petroleum coke, needle coke and coal tar pitch and other low ash materials,th...
	Calcined Petroleum Coke	1,1ton Jumbo Bag, 18tons/20'Container 2,Bulk in Container, 20-21tons/20'Container ,As customers' request FC>98% ASH<1% V<1% S<...
	UHP graphite electrode 300	Ultra high power graphite electrode 300is a high-performance electrode mainly used in steel making and other high-power heavy industry fields. Its ...
	UHP graphite electrode 450	Graphite electrode is mainly applied for metallurgy industry and calcium carbide, phosphor-chemical enterprise, such as iron and steel smelting, in...

Same products

	Ultra-high power graphite electrode	Seller: Handan Hongguan New Material Technology Co., Ltd.	Ultra-high power graphite electrodes are mainly used for the electrode parts in high-temperatur...
	Chongqing Firefly New Materials TechnologyCo.. Ltd.	Seller: 833804	Research and development, production, and sales of graphite materials and products; Research and ...
	Chongqing Firefly New Materials TechnologyCo.. Ltd.	Seller: 833804	Research and development, production, and sales of graphite materials and products; Research and ...
	CUSTOM EXTRUDED GRAPHITE BLOCK	Seller: Pingdingshan Wanhui Graphite Co., LTD	Extruded graphite block, mainly used for molten iron with casting molds and graphite crucible fur...
	CUSTOM GRAPHITE EDM BLOCKS	Seller: Pingdingshan Wanhui Graphite Co., LTD	EDM graphite blocksare becoming more and more popular among our customers. EDM graphite is a new ...