Wood Drill Bits/Brad Point Auger Bites
1:Chisel-like cutting-edge turns around the treaded center removes chips within the previously cut circle
2:The round single spur for clean edge of hole
3:Threaded center point for precisely locating the bit and for fast self-staring of the hole
4:Shank in Hex and 6.35mm(1/4 in) quick change system available
5:The best choice when the holes are short and for narrow places
6:For precise drilling in soft an hard wood,chipboard and plywood
7:To be used with jaw brace or power drill
Other supplier products
|
|
camel lock |
1:Spec.: 45mm
2:Body:brass or iron
3:Cylinder:brass
4:Key: with 3 iron keys
5:Package: colorful box/double blister card
6:Other Spec(mm): 45,mm 55m... |
|
|
Wood Drill Bits/Wood Boring Bits |
1:Forged in one piece from High Carbon Steel
2:Grooved cutting edges cut wood instead of scraping it away,
resulting in reduced heat built-up and c... |
|
|
cased square |
1：Material: Stainless steel body
2：Brass cylinder and keys
3：Hardened shackle
4：Size: 60mm/70mm/80mm/90mm
5：Type: With beam semi-wrapped
6：Normal s... |
|
|
Angle grinder |
KD8100E/KD8115E
Max Disc Capacity: 100/115mm
Hole Diameter of Disc:16mm
No-load Speed:300～11000r/min
Rated lnput Power:750W
Rated Voltage:220～230V
... |
|
|
Rotary hammer |
KD2602A
Drill Capacity:26mm
Max Impact Rate:4000min
No-load Speed:720r/min
Rated Iput Power:850W
Rated Voltage:220~230V
Rated Frequency:50/60HZ |
All supplier products
Same products
