wire mesh welding machine
Function features:air cylinder drived typeThis kind machine is our latest developed reinforcing mesh welding machine. The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. The welding power comes from the cylinders. It’s easy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than the traditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . The welding part is used the springiness input wire trunking that makes the welding copper use for long time. This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touch screen , the operate is more intelligent and reasonable.Main technical parameters:Wire diameter
5.0-12mm
Line wire form
pre-cut wire
Weft wire distance
Mini 25mm
Weft wire form
pre-cut wire
Line wire distance
100-300mm
Rated voltage
380V
Welding net width
2500mm
Rated power
140KVA X 12
Welding speed
25times/min
Overall dimension
24 X 6.0 X 2.65M
line wire No.
24
Length wire net
6000mm
Products & Application:The welded mesh can be used in the floor & wall reinforcing mesh in the building, reinforcing mesh in the tunnel, bridge and road.
Other supplier products
|
|
wire mesh welding machine JY2-1 |
Function Characteristics: motor power
This machine adopts electrical & electronic synchronous control technique both separate-phase welding and we... |
|
|
wire mesh welding machine |
Function features:air cylinder drived type
This kind machine is our latest developed reinforcing mesh welding machine. The line wire and the weft ... |
|
|
wire mesh welding machine JY1 |
Function Characteristics ----motor power
This machine adopts electrical & electronic synchronous control technique both separate-phase welding and... |
|
|
industrial mesh welding machine JY5-1 |
Function features: motor drive
This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program s... |
|
|
Industrial mesh welding machine JY4-1 |
Function Characteristics: motor power
This machine adopts electrical & electronic synchronous control technique both cent-control and welding time... |
All supplier products
Same products
