mechanical valve-JMJ-05
The mechanical valve normally controls the change of direction by the external mechanical force.When the external mechanical force disappears.The valve will auotomatically reset and change direction.Its knob type and push block type structure has memory function.The valve is normally used for control of signal output in pneumatic system.And it can also directly drive single-acting air cylinder.
Adapter bore:G1/8"-G1/4"
Working pressure:0~0.8Mpa
Applicable temperature:-5~60
Other supplier products
|
solenoid valve-ASC-08 |
Joint Pipe Bore: G1/4"
Working Medium: Air
Working-Pressure Range: 0~0.95Mpa
Operating Temperarture Range: 0~60ºC |
|
solenoid valve, pneumatic valve-HV |
1) Working medium: Filter compress air
2) Size: G1/8-G1/2
3) Working-pressure range: 0-1. 0MPa
4) Operating temperature: -10 to 60º C |
|
pneumatic gripper-MHZ2 |
pneumatic component/pneumatic grippers
MHZ2 series
Action:Double acting type single acting:normalclosed
Fluid:air
Highest working pressure:0.7... |
|
mechanical valve-JMJ-05 |
The mechanical valve normally controls the change of direction by the external mechanical force.When the external mechanical force disappears.The v... |
|
solenoid valve-3R210-08 |
Model: 4H210-08, 4R210-08, 4H230-08, 4H310-08, 4H310-10, 4H410
Position AND WAYNO: 2/5, 2/3;
Working Pressure Range: 0-0.8Mpa.
Motion Pattern... |
All supplier products
Same products