angular contact ball bearing
The speed limit higher in angular contact ball bearings can support radial load and axial load, and can also be subject to pure axial load, axial load capacity is determined by the contact angle and contact angle increases with increasing.
Single row angular contact ball bearings can only support axial load in one direction, will cause additional axial force, radial load must be applied to the reverse load of the bearing are generally used in pairs. Double row angular contact ball bearings can withstand greater radial load mainly radial, axial two-way joint loads and moment loads, it can limit or shell two-way axial displacement, the contact angle of 30 degrees.
Installed in pairs of angular contact ball bearings can bear radial load mainly radial, axial two-way joint load can also be subject to pure radial loads. Tandem configuration can only afford a single direction axial load, the other two configurations can withstand axial load in either direction. Combination of this type of bearings in general manufacturers matching pairs of user submitted after installation preload the interference rings and balls in the axial pre-load state, thereby enhancing the entire group of bearings as a single bearing stiffness and rotation accuracy.
Other supplier products
|
|
tapered roller bearing |
Tapered roller bearings are generally of separable design and have tapered cone and cup raceway between which tapered rollers are arranged. Their d... |
|
|
deep groove ball bearing |
It‘s are used in a particularly wide variety of applications. They are non-separable and require little attention or maintenance in service, ... |
|
|
thrust roller bearing |
Thrust roller bearings for main shaft axial load, radial joint load, but the radial load shall not exceed 55% of axial load. Thrust roller bearings... |
|
|
thrust ball bearing |
This type of bearings is separable, which can only carry axial load . The single direction bearings of them can only carry axial load in one direc... |
|
|
angular contact ball bearing |
The speed limit higher in angular contact ball bearings can support radial load and axial load, and can also be subject to pure axial load, axial l... |
All supplier products
Same products
