Anti-theft Foundation Anchor Bolt
Specification
:NJMKT company can provide product design and customized specification according to customer’s requirement.
Installation guide
During installation, drill the hole to proper depth and diameter per specifications using ordinary impact drill. Enlarge the hole using a special tool. Embed this anchor, calibrate the embedment depth, tighten the foundation anchor plate and the cone head causes the bolt to lift, then push the blade to the wall of cone hole until the hole wall, blade and expansion head fit together. Then tighten the auxiliary nut to finish the installation. Screw the adjusting nut onto the bolt, then place ATM equipment foundation to the bolt and adjust the horizontal level. Screw the fixed special nut to finish the installation.
During removing this anchor, please loosen and disassemble the nuts, remove the foundation anchor plate, then hammer the bolt slightly and lift by a special tool to take out the bolt to finish the removal.
After-sales service
We provide free service including customized product design, on-site technical guidance and support for installation and removal.
Important announcement: This is NJMKT company independent research patent and we have already been approved and issued "patent certificate" by the State Intellectual Property Office. It must not be copied, reproduced, transmitted or disclosed without the prior written permission or authorization of NJMKT.
Standard Specification
|
Item |
M12 |
M16 |
M20 |
M24 |
|
Diameter of drilled hole |
φ22mm |
φ28mm |
φ35mm |
φ38mm |
|
Effective embedment depth |
80-150mm |
80-150mm |
80-150mm |
80-150mm |
|
Tensile strength |
125KN |
196KN |
282KN |
Send product request
Other supplier products
 |
Anchorage Adhesive for heavy anchoring | Ultimate-performance epoxy mortar for rebar connections and heavy anchoring Non-toxic report & Safety appraisal report are available; the best... |
 |
Barrel Anchorage Adhesive | Suitable for anchor and rebar embedding in all construction base materials Features: ●Main components: modified epoxy resin, nanomaterials, other ... |
 |
Carbon Fiber Plate | MKT-carbon fiber plate is reinforced uni-directional plate, and manufactured by imported high-quality carbon fiber of Toray Industries and molding... |
 |
Dismountable Anchor | ●Consist: anchor rod, undercut lock, spacer sleeve, flat washer, anti-seismic washer, nut ●Material:carbon steel, alloy steel, stainless steel ●An... |
 |
Resin Capsule | Curing in a short time and perfectly matched with conical adhesive anchor Material：polyurethane acrylic + quartz sand Advantages: Fast cure,... |
Same products
 |
Prestressed Anchorages: Wedges, Anchor Head, Bearing Plate | Seller: Tianjin Huayongxin Prestressed Steel Wire Co., Ltd | A Prestressed Anchoragesconsist of wedges, anchor head and bearing plate for transfer the post-te... |
 |
Post Tensioning Anchor | Seller: Cangzhou RuiYi Prestressed Machinery Co., Ltd | Post Tensioning Anchoris a kind of anchorage suitable for concrete prestressing tensioning in the... |
 |
U Anchors | Seller: Wuhu Ping\'An Rubber Co., Ltd. | U Anchors are designed to provide superior grip and protection in concrete, masonry, and other ha... |
 |
U Anchors | Seller: Wuhu Ping\'An Rubber Co., Ltd. | U Anchors are designed to provide superior grip and protection in concrete, masonry, and other ha... |
 |
Anchor | Seller: QINGDAO WANCHENG ANCHOR CHAIN CO LTD | How does anchor work? Anchor is to ensure that the safety of a kind of indispensable equipment... |
