Anti-theft Foundation Anchor Bolt
Specification
:NJMKT company can provide product design and customized specification according to customer’s requirement.
Installation guide
During installation, drill the hole to proper depth and diameter per specifications using ordinary impact drill. Enlarge the hole using a special tool. Embed this anchor, calibrate the embedment depth, tighten the foundation anchor plate and the cone head causes the bolt to lift, then push the blade to the wall of cone hole until the hole wall, blade and expansion head fit together. Then tighten the auxiliary nut to finish the installation. Screw the adjusting nut onto the bolt, then place ATM equipment foundation to the bolt and adjust the horizontal level. Screw the fixed special nut to finish the installation.
During removing this anchor, please loosen and disassemble the nuts, remove the foundation anchor plate, then hammer the bolt slightly and lift by a special tool to take out the bolt to finish the removal.
After-sales service
We provide free service including customized product design, on-site technical guidance and support for installation and removal.
Important announcement: This is NJMKT company independent research patent and we have already been approved and issued "patent certificate" by the State Intellectual Property Office. It must not be copied, reproduced, transmitted or disclosed without the prior written permission or authorization of NJMKT.
Standard Specification
|
Item |
M12 |
M16 |
M20 |
M24 |
|
Diameter of drilled hole |
φ22mm |
φ28mm |
φ35mm |
φ38mm |
|
Effective embedment depth |
80-150mm |
80-150mm |
80-150mm |
80-150mm |
|
Tensile strength |
125KN |
196KN |
282KN |
在线联系供应商
Other supplier products
 |
Eccentric Check Nut | Material:carbon steel; stainless steel; nonferrous metal Consist:Main nut: convex nut (lower nut) Auxiliary nut: concave nut (upper nut) Instructi... |
 |
Anchorage Adhesive for heavy anchoring | Ultimate-performance epoxy mortar for rebar connections and heavy anchoring Non-toxic report & Safety appraisal report are available; the best... |
 |
Adhesive Bonded Undercut Anchor | Key Features ●Consist: anchor rod, key lock, expansion head, washer, nut ●Material:carbon steel, alloy steel, stainless steel ●Grade: grade 5.8, 6... |
 |
Barrel Anchorage Adhesive | Suitable for anchor and rebar embedding in all construction base materials Features: ●Main components: modified epoxy resin, nanomaterials, other ... |
 |
Conical Specified Adhesive Anchor | High anchoring force, the best performance in cracked concrete Material: alloy steel grade 5.8, 6.8, 8.8, 10.9, 12.9; stainless steel 50 70 80 De... |
Same products
 |
Prestressed Anchorages: Wedges, Anchor Head, Bearing Plate | 卖方: Tianjin Huayongxin Prestressed Steel Wire Co., Ltd | A Prestressed Anchoragesconsist of wedges, anchor head and bearing plate for transfer the post-te... |
 |
Post Tensioning Anchor | 卖方: Cangzhou RuiYi Prestressed Machinery Co., Ltd | Post Tensioning Anchoris a kind of anchorage suitable for concrete prestressing tensioning in the... |
 |
U Anchors | 卖方: Wuhu Ping\'An Rubber Co., Ltd. | U Anchors are designed to provide superior grip and protection in concrete, masonry, and other ha... |
 |
U Anchors | 卖方: Wuhu Ping\'An Rubber Co., Ltd. | U Anchors are designed to provide superior grip and protection in concrete, masonry, and other ha... |
 |
Anchor | 卖方: QINGDAO WANCHENG ANCHOR CHAIN CO LTD | How does anchor work? Anchor is to ensure that the safety of a kind of indispensable equipment... |
