Hydraulic nuts
Hydraulic nuts are used for bolts that need to be disassembled frequently; pre-tightening of super-large bolts; locking of large workpiece, etc. It can also be used as a hydraulic interference connection and disassembly tool. Installing or removing bearings on tapered shafts or sleeves is usually a difficult and time-consuming project. Use hydraulic nuts can improve work efficiency. The principle is that the hydraulic oil is inputted into the nut by the high-pressure oil pump to generate the force that pushes the piston, which meets the requirements of installing or removing the bearing, it is accurate and safe.
Other supplier products
|
Precision Locknut |
Precision locknut is a common locking part in mechanical parts, used to lock gears, pulleys, and other mechanical parts. The lock nut is used to po... |
|
Lock Washer |
The lock washer is mainly used to prevent loosening of the parts matched with washer. The most common ones are spring washers, flat washers, and in... |
|
Locknut |
Locknut is common used locking part in mechanical parts, can be used to lock gears, pulleys, and other mechanical parts.The lock nut is used to pos... |
|
Coupling |
The coupling is used to firmly connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and to... |
|
Heave tight coupling sleeve |
Heave tight coupling sleeve are widely used in heavy load,it is the mechanical coupling of an advanced base parts. In the coupling of shaft and the... |
All supplier products
Same products