.

Poly (Polycrystalline Diamond Powder)

1) Properties

Detonation-synthesized polycrystalline diamond powder

The structure resembles the rare natural polycrystalline black diamond, metallic-grey, superior toughness, self-sharpening.

The lapping and polishing efficiency of the detonation-synthesized polycrystalline diamond micro-powder is 2 to 4 times better compared with that of the mono-crystalline diamond that is naturally occurred or synthesized via the static pressure method, Silicon Nitride, Corundum, and other abrasive materials.

polycrystalline diamond micro-powder allows the manufacturing of the smoothest surface possible:

  1. diamond micro powderof size 2-4micron to the polishing surface, Ra(roughness)<1.6nm

polycrystalline diamond can maintain its dull mono-crystalline structure by releasing the outer layer, hence will produce the most scratch free surface possible.

When applied to the surface of a workpiece (for example, the inner surface of a cylinder in an engine) via chemical plating method, the wearability of the surface is superior to that of a surface treated with any other materials.

Via after-sinter technique, polycrystalline diamond micro-powder can be turned into polycrystalline diamond particles of a large size that are highly valuable in a variety of industries.

2) Application

Lapping and polishing a variety of surfaces that require superior smoothness.

Improving the wearability of a mechanical component

Via after-sinter technique can be applied in a variety of industries.

Can be made into liquid abrasives, gel abrasives, and many other types of abrasive tools that are capable of ultra-fine lapping and polishing tasks.

Industries:

Polycrystalline diamond micron powder can be used for below industries:

Computer industry: Read/Write head lapping, rigid disk media texturing

Gem polishing

Semi-Conductor, electronic ceramic, optical instruments

Used as anti-wearing media in special rubber and plastics

Chemistry catalyst, Biomedicine

With more than 20 years experience, E-Grind provides all sizes of Poly (Polycrystalline diamond micron powder) with high removal rate, superior surface finishing, and long using life. Our Quality Control Department keeps strict and careful control of raw material from lot to lot to ensure quality basis. All the products are tested during production and after processing, to make sure of quality consistency and quality traceability. The test report is attached to each shipment for customers reference.

Available Sizes:

0-0.15, 0-0.2, 0-0.35, 0-0.5, 0.25-0.35, 0-1, 0-2, 2-4, 3-6, 3-7, 4-8, 4-9, 6-10, 6-12

Custom-made sizes are also available upon customers' demand.

E-GrindAbrasives is professional in diamond and CBN products with over 50 years experience. Contact us to know more abrasive powder types!



Send product request

To: Henan E-Grind Abrasives Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

TSP(Thermally Stable Polycrystalline Diamond)
TSP(Thermally Stable Polycrystalline Diamond) TSP diamondis made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resista...
Saw Grit Diamond
Saw Grit Diamond E-Grind's Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, ...
Poly (Polycrystalline Diamond Powder)
Poly (Polycrystalline Diamond Powder) Available sizes are 0-0.15, 0-0.2, 0-0.35, 0-0.5, 0.25-0.35, 0-1, 0-2, 2-4, 3-6, 3-7, 4-8, 4-9, 6-10, 6-12 Custom-made sizes are also availab...
Resin Bond Micron Diamond
Resin Bond Micron Diamond Diamond Resin bond micron The Friable type of diamond micron. Diamond Resin bond micron Is made from Diamond Resin Bond Mesh. It has a multi-crys...
TSP(Thermally Stable Polycrystalline Diamond)
TSP(Thermally Stable Polycrystalline Diamond) TSP(Thermally Stable Polycrystalline Diamond) TSP diamondis made of diamond powdersand a small amount of binder sintered under high temperature an...
All supplier products

Same products

Dresser, 0.4 Carat Single Point Grinding Wheel Tapered Point Tool for Dressing and Grinding Bench, Item surface, Cylindrical Internal Grinding
Dresser, 0.4 Carat Single Point Grinding Wheel Tapered Point Tool for Dressing and Grinding Bench, Item surface, Cylindrical Internal Grinding Seller: 青岛晟鑫杰金刚石工具有限公司
Aluminum Oxide Fiber Disc
Aluminum Oxide Fiber Disc Seller: CHANGZHOU RMN ABRASIVES CO., LTD Aluminum Oxide Fiber Disc It is strong and has durable, long sanding life, high sanding performa...
AJ26M Abrasive Belts for Metal
AJ26M Abrasive Belts for Metal Seller: CHANGZHOU RMN ABRASIVES CO., LTD AJ26M Abrasive Belts for Metal RMC AJ26M abrasive belts for metal backing is Jwt flexible and hi...
AJ25 Aluminium Oxide Abrasive Belts
AJ25 Aluminium Oxide Abrasive Belts Seller: CHANGZHOU RMN ABRASIVES CO., LTD AJ25 Aluminium Oxide Abrasive Belts The backing cloth make anti-slip treatment with high strengt...
AF37M Green Abrasive Film
AF37M Green Abrasive Film Seller: CHANGZHOU RMN ABRASIVES CO., LTD RMC AF37M green abrasive microfinishing filmcan be used as Velcro and PSA disc, and also suitable...