.

Green silicon carbide SIC 63C F2000 fine powder

Green silicon carbide SIC 63C F2000

Green silicon carbide powder is a very hard abrasive material with uniform particle size distribution. The hardness of it only ranks after diamond and B4C, and it is harder than black silicon carbide. So it is suitable to grinding large range of hard material such as titanium alloy, marble, carbide alloy, optical glasses, ceramics, etc.

On the other hand, green silicon carbide has extraordinary features such as high chemical stability, low thermal expansion rate, it is suitable for heat resistance & corrosion resistance coatings, paints, and other construction products.

Typical physical properties ofGreen silicon carbide powder

Mohs Hardness:

Vickers Hardness:

3100-3400kg/mm2

Specific Gravity:

  1. 3

Bulk density(LPD):

  1. 3

Color:

Green

Particle shape:

Hexagonal

Melting Point:

Dissociated at about 2600 centigrade

Maximum service temperature:

1900 centigrade

Friability

Friable

Thermal conductivity

  1. °C)

Thermal expansion coefficient

7-9 x10-6 /℃(0-1600°C)

Chemical analysis ofGreen silicon carbide powder

TYPICAL CHEMICAL ANALYSIS

Chemical Content

F20-F220

F230-F2000

SiC

Min 99%

Min 98.5%

SiO2

Max 0.50%

Max 0.70%

F,Si

Max 0.20%

Max 0.40%

Fe2O3

Max 0.10%

Max 0.15%

Max 0.20%

Max 0.30%

Max 0.05%

Max 0.09%

Product Feature ofGreen silicon carbide powder

  1. Extremely high hardness (Mohs 9.5, Vickers 3100-3400kg/mm2) with high wear-resistance ability. The hardness of SiC decrease with the increasing of temperature. But still, even at the temperature of 1200°C, the hardness of green SiC is about twice that of fused alumina’s.
  2. Excellent chemical resistance and oxidation resistance. When heated at high temperatures, silicon carbide only oxidizes on the surface, forming a silicon dioxide film. The film can protect the silicon carbide material from oxidation.As a result, even in 1600°C ,green SiC can maintain stability to most strong acids and alkalis.
  3. High Toughness.The toughness of silicon carbide abrasive refers to the difficulty of breaking under the action of external force. Taking F46 grit as an example, the toughness of carborundum tested by static pressure method is about 68-78%.Comparing with fused alumina, the mechanical strength of silicon carbide is higher. F120 for example, the compressive strength of silicon carbide is 186KN/cm2, and the compressive strength of corundum abrasive is 100KN/cm2.
  4. Excellent thermal shock resistance with low thermal expansion coefficient. At a temperature of 25-1400°C, the average thermal expansion coefficient of silicon carbide is 4.4x10-6/°C, while the thermal expansion coefficient of fused alumina is 7-8x10-6/°C.
  5. High temperature resistance; high temperature strength. The melting point of green silicon carbide is 2600 °C, and the maximum operating temperature can reach 1900 °C. Applying silicon carbide to the inner wall of the engine can increase the life of the engine.
  6. High purity. The green silicon carbide grain from us is milling from A grade green SiC block. Then sieve to high consistency particles.

Applications ofGreen silicon carbide powder

  1. Precision polishing for hard optical glass such as camera lens.
  2. Abrasive blasting on hard metal CNB knife such as titanium alloy, carbide alloy, etc.
  3. Polishing and grinding quartz glass.
  4. Grinding hard stone, marbles, granite, etc.
  5. Polishing PZT/Piezoelectric ceramic.
  6. Blasting copper and copper alloy.
  7. Surface treatment on diamond tools.
  8. Wire sawing.
  9. Polishing jewelry such as diamond and cinnabar.
  10. Grinding other thin brittle material precise component.
  11. Anti-fire novel Nano Aerogel.
  12. Fire insulation material such as sintered ceramics.
  13. Teflon coating.
  14. Fluorocarbon coating and paint.
  15. High quality brake additives such as aero plane brakes.
  16. Silicon carbide ceramic filler.
  17. Polishing tools such as wet diamond polishing pad, PVC grinding disc, etc.

Specification of Green silicon carbide powder

JIS Grit Size

D0(Micron)

D3(Micron)

D50(Micron)

D94(Micron)

#240

≤ 127

≤ 103

≥ 40

#280

≤ 112

≤ 87

≥ 33

#320

≤ 98

≤ 74

≥ 27

#360

≤ 86

≤ 66

≥ 23

#400

≤ 75

≤ 58

≥ 20

#500

≤ 63

≤ 50

≥ 16

#600

≤ 53

≤ 41

≥ 13

#700

≤ 45

≤ 37

≥ 11

#800

≤ 38

≤ 31

≥ 9.0

#1000

≤ 32

≤ 27

≥ 7.0

#1200

≤ 27

≤ 23

≥ 5.5

#1500

≤ 23

≤ 20

≥ 4.5

#2000

≤ 19

≤ 17

≥ 4.0

#2500

≤ 16

≤ 14

≥ 3.0

#3000

≤ 13

≤ 11

≥ 2.0

#4000

≤ 11

≤ 8.0

≥ 1.8

#6000

≤ 8.0

≤ 5.0

≥ 0.8

#8000

≤ 6.0

≤ 3.5

≥ 0.6

FEPA standard:



Send product request

To: Zhengzhou HAIXU Abrasives
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Black silicon carbide F014 F016 for ductile iron foundry
Black silicon carbide F014 F016 for ductile iron foundry Black silicon carbide F014 F016 for ductile iron foundry Product Introduction Black silicon carbide (SiC) is also called black carborundum. It is...
Boron carbide micron F600 F800 for B4C ceramics
Boron carbide micron F600 F800 for B4C ceramics Boron carbide micron F600 F800 for B4C ceramics neutron shielding additive B4C boron carbide powder,also known as B4C is produced from high temper...
SiC powder Green silicon carbide 63C 64C F400
SiC powder Green silicon carbide 63C 64C F400 Green silicon carbide powder Green silicon carbide powder is a very hard abrasive material with uniform particle size distribution. The hardnes...
Silicon carbide black sand F070 F080 Glass grinding abrasive grit
Silicon carbide black sand F070 F080 Glass grinding abrasive grit Black Silicon carbide Grain is an extremely hard and 99% SiC carborundum grit. As an abrasive material, it can work well for abrasive blasting, sur...
China supplier B4C boron carbide powder F100 F120 F150
China supplier B4C boron carbide powder F100 F120 F150 China supplier B4C boron carbide powder F100 F120 F150 neutron shielding additive B4C boron carbide powder,also known as B4C is produced from high...
All supplier products

Same products

Dresser, 0.4 Carat Single Point Grinding Wheel Tapered Point Tool for Dressing and Grinding Bench, Item surface, Cylindrical Internal Grinding
Dresser, 0.4 Carat Single Point Grinding Wheel Tapered Point Tool for Dressing and Grinding Bench, Item surface, Cylindrical Internal Grinding Seller: 青岛晟鑫杰金刚石工具有限公司
Aluminum Oxide Fiber Disc
Aluminum Oxide Fiber Disc Seller: CHANGZHOU RMN ABRASIVES CO., LTD Aluminum Oxide Fiber Disc It is strong and has durable, long sanding life, high sanding performa...
AJ26M Abrasive Belts for Metal
AJ26M Abrasive Belts for Metal Seller: CHANGZHOU RMN ABRASIVES CO., LTD AJ26M Abrasive Belts for Metal RMC AJ26M abrasive belts for metal backing is Jwt flexible and hi...
AJ25 Aluminium Oxide Abrasive Belts
AJ25 Aluminium Oxide Abrasive Belts Seller: CHANGZHOU RMN ABRASIVES CO., LTD AJ25 Aluminium Oxide Abrasive Belts The backing cloth make anti-slip treatment with high strengt...
AF37M Green Abrasive Film
AF37M Green Abrasive Film Seller: CHANGZHOU RMN ABRASIVES CO., LTD RMC AF37M green abrasive microfinishing filmcan be used as Velcro and PSA disc, and also suitable...