Black silicon carbide F014 F016 for ductile iron foundry
Black silicon carbide F014 F016 for ductile iron foundry
Product Introduction
Black silicon carbide (SiC) is also called black carborundum. It is a non-metallic material made from Petroleum coke and silicon sand by melting in a high-temperature resistance furnace. The main application of black silicon carbide in cast iron & ductile iron foundry is deoxidizer due to its high refractory stability, good thermal stability, high-temperature slag resistance, and good deoxidization and reduction properties. Adding silicon carbide to the iron before casting can improve the performance and quality of cast iron. Usually, 85-90% silicon carbide is suitable for the casting of gray cast iron, and 97-98% silicon carbide is suitable for the casting of ductile iron.
The melting point of silicon carbide is as high as 2700℃. During the process of melting cast iron in an induction furnace, it does not melt in high-temperature molten iron, but rather mix in cast iron. The addition of black silicon carbide can improve the carbon equivalent, serve as a Oxygen scavenger to strengthen the reducibility of molten iron. It can prevent carbide precipitation, improve the compactness of cast iron, increase the graphite spheroidization rate of nodular cast iron. Thus, adding carborundum can improve the quality of cast iron.
The fuctions of black silicon carbide particles in ductile iron casting:
Physical properties of Black silicon carbide F16/F20 for ductile iron foundry
|
Hardness: |
Mohs:9.2, Vicker :28-32 GPa |
|
Melting Point: |
dissociated at about 2300 °C |
|
Maximum service temperature: |
1900℃ |
|
Specific Gravity: |
|
|
Bulk density(LPD): |
|
|
Color: |
Black |
|
Particle shape: |
Hexagonal |
|
Modulus of Elasticity |
58-65x106 psi |
|
Coefficient of Thermal Expansion |
|
|
Thermal Conductivity |
71-130 W/MK |
Chemical contents of Black silicon carbide F16/F20 for ductile iron foundry
|
Item |
Content |
|
SiC |
|
|
SiO2 |
|
|
H2O3 |
|
|
Fe2O3 |
|
|
F,Si |
Other specifications of black silicon carbide for foundry & refractory:
|
SiC purity |
Fe2O3 |
Moisture |
||
|
SiC86 |
≥ 86% |
≤2.4% |
≤ 2.0% |
≤ 0.2% |
|
SiC88 |
≥ 88% |
≤ 2.3% |
≤ 2.0% |
≤ 0.2% |
|
SiC90 |
≥ 90% |
≤ 2.0% |
≤ 1.8% |
≤ 0.2% |
|
SiC92 |
≥ 92% |
≤ 1.8% |
≤ 1.7% |
≤ 0.2% |
|
SiC93 |
≥93% |
≤ 1.8% |
≤ 1.6% |
≤ 0.2% |
|
SiC95 |
≥ 95% |
≤ 1.0% |
≤ 1.3% |
≤ 0.2% |
|
SiC97 |
≥ 97% |
≤ 0.8% |
≤ 1.2% |
≤ 0.2% |
|
≥97.5% |
≤ 0.8% |
≤ 0.9% |
≤ 0.2% |
|
|
SiC98 |
≥ 98% |
≤ 0.5% |
≤ 0.5% |
≤ 0.2% |
Black silicon carbide particle sizes for foundry & refractory:
Macro grit and grain:F12,F14,F16,F20,etc.
Fraction:1-3mm 0-10mm,0-5mm,1-10mm,1-5mm, etc.
Send product request
Other supplier products
 |
Silicon carbide black sand F070 F080 Glass grinding abrasive grit | Black Silicon carbide Grain is an extremely hard and 99% SiC carborundum grit. As an abrasive material, it can work well for abrasive blasting, sur... |
 |
Green Carborundum powder α-SiC 64C F1200 for ceramics | Green Carborundum powder α-SiC 64C F1200 for ceramics Green silicon carbide powder is a very hard abrasive material with uniform particle si... |
 |
Boron Carbide powder 325mesh | Boron Carbide powder 325mesh neutron shielding additive B4C boron carbide powder，also known as B4C is produced from high temperature smelting bori... |
 |
98% SiC refractory sand F012 F014 F016 silicon carbide | 98% SiC refractory sand F012 F014 F016 silicon carbide Product Introduction Black silicon carbide (SiC) is also called black carborundum. It is a... |
 |
GC green SiC powder 64C F240 F280 silicon carbide | GC green SiC powder 64C F240 F280 silicon carbide Green silicon carbide powder is a very hard abrasive material with uniform particle size distr... |
Same products
 |
Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 | Seller: Zhengzhou HAIXU Abrasives | Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 Ceramic Foundry Sand is a corundum based cast... |
|
|
98% SiC refractory sand F012 F014 F016 silicon carbide | Seller: Zhengzhou HAIXU Abrasives | 98% SiC refractory sand F012 F014 F016 silicon carbide Product Introduction Black silicon carbi... |
|
|
Black silicon carbide F014 F016 for ductile iron foundry | Seller: Zhengzhou HAIXU Abrasives | Black silicon carbide F014 F016 for ductile iron foundry Product Introduction Black silicon car... |
 |
Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm | Seller: Zhengzhou HAIXU Abrasives | Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm Product Introduction Black silicon carbi... |
 |
Refractories for Iron & Steel Industries | Seller: Jiabo Trading |
