JDB Embedded Solid Lubricating Bearing
Structure Characteristics and Applications:
It is backed with strengthening brass that has good physical performance and good capability for casting. What's more, the brass backing has pretty good anti-erosion ability in air, fresh water and seawater. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. The product is widely used on consecutive casting and rolling machines, mine-exploiting equipment, ships, steam engine, etc.
Bearing design height and thickness:
Bearing Height: bearing diameter from the shaft, the shaft is determined, so by loading conditions, load bearing by bearing a high pressure P (N/mm2) of the decision, usually bearing the L/D (bearing height / bearing diameter ), the ratio in the range of 0.5-3 for the appropriate, but should pay particular attention to the high load, easy cause deviation contacts, high-speed situations caused by heat, then L/D is more appropriate to take the following 1.
Bearing wall: plain bearings with rolling bearings compared to the wall thickness less restricted, thin wall thickness of one of its main advantages. Under normal circumstances, the wall thickness t = (0.05 ~ 0.07) d + (2 ~ 5) mm
Caution:
Send product request
Other supplier products
 |
FB bronze wrapped bushing | FB090 is a kind of bushes wrapped by bronze strip. The bronze is made as the particular formulation with high specific and gravity, and on its surf... |
 |
ST steel bushings | This product is backed with steel, and it`s inner surface has many crossed oil groove, round and elliptical oil socket, After quenched and tempered... |
 |
JDB-1U Casting Bronze Bushings | It is backed with bronze alloy. Products of IGF080 series is widely used on agricultural machines, cranes, electric motorcycles, spring bolt and tr... |
|
|
JDB Embedded Solid Lubricating Bearing | Structure Characteristics and Applications: It is backed with strengthening brass that has good physical performance and good capability for casti... |
 |
SF2 boundary lubricating bushings( DX) | SF-2 boundary lubrication bushing is based on a composite material with 3 firmly bonded layers: steel as backing. sintered bronze sphericalpowder a... |
Same products
|
|
JDB Embedded Solid Lubricating Bearing | Seller: JIASHAN ZHONGYAO BEARING CO., LTD | Structure Characteristics and Applications: It is backed with strengthening brass that has good ... |
