API Flange Stainless Steel Globe Valve

• 

Introduction to

The control valve is a compulsory sealed valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve 6 from below the valve disc, the resistance to be overcome by the operating force is the frictional force of the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve. The diameter of the stem must be large, otherwise, the failure of the valve top bend will occur. In recent years, since the emergence of self-sealing valves, the medium flow direction of theglobe control valvehas changed from above the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, and the force to open the valve is large. The diameter of the rod can be reduced accordingly. At the same time, this type of is also tight under the action of the medium. China's valvehas stipulated that the flow direction of the globe control valvewill be used from top to bottom.

When thewater globe control valveis opened, when the opening height of the valve disc is 25% to 30% of the nominal diameter, the flow has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of the shut-off valve should be determined by the stroke of the valve disc. This type of valve should generally be installed horizontally in the pipeline.

Advantages:

Disadvantages of Globe Control Valve:

The type offlange globe control valveis divided into external thread type and internal thread type according to the position of the stem thread. According to the flow direction of the medium, there are straight-through, direct-current and angular. The shut-off valve is divided into sealing forms, and it has a packing-sealed shut-off valve and a bellows-sealed shut-off valve.

Structure of the globe control valve:

The structure of theXINTAIglobe control valvebody has straight-through, DC, and right-angle. Straight-through is the most common structure, but its fluid resistance is greatest. DC fluid has low resistance and is mostly used for fluids with solid particles or high viscosity. Right-angle valve bodies are mostly forged, which is suitable forflangewith the smaller passage and higher pressure.

A, different from the ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.

Application scope: petroleum chemical industry, electric power, metallurgy, medicine, real estate, municipal engineering, and other industries.

click to konw more.

Other supplier products

	DIN FLANGE CAST STEEL SWING CHECK VALVE	Features: Size Range: 1/2" up to 12" Pressure Class Range: PN16 To PN100 End Connection: BW,RF,RTJ DIN Flange Swing Cla...
	JIS FLANGE STAINLESS STEEL BALL VALVE	JIS FLANGE STAINLESS STEEL BALL VALVE JIS FLANGE STAINLESS STEEL BALL VALVEFeatures: Size Range: 1/2" up to 20" P...
	API FLANGE CAST STEEL SWING CHECK VALVE	Features: Size Range: 1/2" up to 30" Pressure Range: ANSI 150LB to 2500LB End Connection: BW,RF,RTJ Materialof API Flan...
	FORGED STEEL LIFT CHECK VALVE	Features: Size Range: 1/2" up to 2" Pressure Class Range: 150LBTo 2500LB End Connection: BSP,BSPT,NPT Material: Stain...
	JIS FLANGE CAST STEEL GLOBE VALVE	JIS FLANGE CAST STEEL GLOBE VALVE Features: Size Range: 1/2" up to 20" Pressure Range: 10K To 40K E...

Same products

	API Standard Flange Swing Check Valve	Seller: Wenzhou Chenyu Valve Co., Ltd	Flange Swing Check Valveis a specific and widely used type of Check Valve. Its primary function i...
	Triple Eccentric Flange Butterfly Valve	Seller: Wenzhou Chenyu Valve Co., Ltd	The triple eccentric flange butterfly valvehas three eccentricities. The first eccentric shaft de...
	Casting Trunnion Ball Valve	Seller: Wenzhou Chenyu Valve Co., Ltd	Cast steel trunnion-mounted ball valvesfeature a split body design and can be customized or autom...
	Aftermarket Excavator Control Valves	Seller: Colorful tower machinery co ,. ltd	Aftermarket Excavator Control Valves Our are precision-engineered hydraulic components desig...
	TILTING CHECK VALVE	Seller: HEBEI LEFLOW IMPORT AND EXPORT CO., LTD.	TILTING CHECK VALVE Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture:...