API Flange Stainless Steel Globe Valve
|
Features: |
|
Size Range: 1/2" up to 48" |
|
Pressure Range: ANSI 150LB to 2500LB |
|
End Connection: BW,RF,RTJ |
|
Operate: Handwheel, Actuator |
|
Material: Stainless Steel, Duplex Stainless Steel |
|
Seals: Metal to Metal |
Introduction to
The control valve is a compulsory sealed valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve 6 from below the valve disc, the resistance to be overcome by the operating force is the frictional force of the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve. The diameter of the stem must be large, otherwise, the failure of the valve top bend will occur. In recent years, since the emergence of self-sealing valves, the medium flow direction of theglobe control valvehas changed from above the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, and the force to open the valve is large. The diameter of the rod can be reduced accordingly. At the same time, this type of is also tight under the action of the medium. China's valvehas stipulated that the flow direction of the globe control valvewill be used from top to bottom.
When thewater globe control valveis opened, when the opening height of the valve disc is 25% to 30% of the nominal diameter, the flow has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of the shut-off valve should be determined by the stroke of the valve disc. This type of valve should generally be installed horizontally in the pipeline.
|
Standards: |
|
Valves Design: API6D, API608 |
|
Face to Face: ANSI B16.10 |
|
End Connection: ANSI B16.5, ANSI B16.25 |
|
Testing&Inspection: API6D, API598 |
|
Suitable Medium: Water, Oil, Air, And Some Corrosive liquid |
Advantages:
Disadvantages of Globe Control Valve:
The type offlange globe control valveis divided into external thread type and internal thread type according to the position of the stem thread. According to the flow direction of the medium, there are straight-through, direct-current and angular. The shut-off valve is divided into sealing forms, and it has a packing-sealed shut-off valve and a bellows-sealed shut-off valve.
Structure of the globe control valve:
The structure of theXINTAIglobe control valvebody has straight-through, DC, and right-angle. Straight-through is the most common structure, but its fluid resistance is greatest. DC fluid has low resistance and is mostly used for fluids with solid particles or high viscosity. Right-angle valve bodies are mostly forged, which is suitable forflangewith the smaller passage and higher pressure.
A, different from the ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.
Application scope: petroleum chemical industry, electric power, metallurgy, medicine, real estate, municipal engineering, and other industries.
click to konw more.
在线联系供应商
Other supplier products
 |
FORGED STEEL GLOBE VALVE | FORGED STEEL GLOBE VALVE Features: Size Range: 1/2" up to 2" Pressure Class Range: 150LB To 2500LB End Connection: NPT,SW ... |
 |
API Flange Cast Steel Swing Check Valve | Features: Size Range: 1/2" up to 30" Pressure Range: ANSI 150LB to 2500LB End Connection: BW,RF,RTJ Material: Carbon Steel ... |
 |
1-PIECE BALL VALVE | 1-PIECE BALL VALVE Features: Size Range: 1/2" up to 4" Pressure Range: 200PSI To 1000PSI End Connection: BSP, BSPT, NPT ... |
 |
JIS FLANGE CAST STEEL SWING CHECK VALVE | Features: Size Range: 1/2" up to 24" Pressure Range: 10K To 40K End Connection: BW,RF Material: Carbon steel Seal... |
 |
JIS FLANGE CAST STEEL GATE VALVE | JIS FLANGE CAST STEEL GATE VALVE Features: Size Range: 1/2" up to 20" Pressure Range: 10K To 40K End Connection: BW,RF ... |
Same products
 |
Propane Gas Fire Pit Valve Control System Kit | 卖方: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. 1/2" Brass Control Key valve with 3/8" male flare adapter of 2;2. 3" Key... |
 |
UB6 Sleeved Plug Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | PTFE Sleeved Plug ValveValve description: Sleevedplug valve, PTFE seatDesign standard: API 599Bod... |
 |
Y Type Check Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Discover quality with our Y Type Check Valve from China. Made of forged Carbon Steel ASTM A105N, ... |
 |
ASTM A352 LCC Wedge Gate Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Explore our top-tier wedge gate valve meticulously crafted in our Chinese factory, featuring prem... |
 |
Bathroom chromed brass angle valve | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Constructed from premium brass, our Brass Angle Valves are designed to withstand the test of time... |
