GB/T EV DC Charging Socket
Mechanical Life
lMechanical life: no-load plug>10000times
lInsertion force: <140N
Applied Material
Shell material: thermoplastics, flame retardant grade UL94-0
Contact-tube: Copper alloy, silver-plated
Environmental Performance
Operating temperature: -30℃~+50℃
Electrical Performance
The rated current:80A, 125A, 200A, 250A
The rated voltage: 750V/1000V
Insulation resistance: >2000MΩ(DC1000V)
Pins temperature rise: <50K
Withstand voltage: 4500V (DC+/DC-/PE)
Contact impedance: 0.5mΩMax
Features of GB/T EV DC Electric Car Charging Sockets
Conform to the provisions and requirements of <Connection set for conductive charging of electric vehicles> GB/ T 20234.2-2015.
Have one or two PTC (PT1000) thermistor (can match with hela lock) ,have functions of signal feedback.
Beautiful appearance, prevention cap can be installed on the left side, the right side or the front of it.
Reliable material, flame retardant, presssure proof, wear-resisting, impact resistance, high oil proof.
Excellent protection performance, prodection grade achieved IP55 (working condition).
GBT EV DC Electric Car Socket TypesParameter
|
Product Type |
Rated Current |
Cable Specifications |
Note |
|
AG-GBDC-C80S |
80A |
H07BZ5-F2X20mm2+1x25mm2+2x4mm2+8x0.75mm2 |
Wire length and tail end treatment according to customer configuration. |
|
AG-GBDC-C125S |
125A |
H07BZ5-F2X35mm2+1 x25mm2+2x4mm2+8x0.75mm? |
|
|
AG-GBDC-C200S |
200A |
H07BZ5-F2X70mm2+1x25mm2+2x4mm2+8x0.75mm2 |
|
|
AG-GBDC-C250S |
250A |
H07BZ5-F2X95mm2+1x25mm2+2x4mm2+8x0.75mm2 |
As one of ev charging point manufacturers, we can offer sorts of type 2 charging socketfor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
TYPE2-TYPE1 Adaptor Charging Mode3 | Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressu... |
 |
GB/T EV AC Charging Socket | Mechanical Life Mechanical life: no-load plug>10000times Insertion force:<100N Applied Material Shell material: thermoplastics, f... |
 |
SAE J1772 EV Charging | "American Standard" refers to the SAE Port J1772standard. SAE J1772 is just a general term. It includes four subdivision standards and three differ... |
 |
TYPE2-TYPE1 Adaptor Charging Mode3 | Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressure. ... |
 |
TYPE2-TYPE2 Charging Mode3 | Conform to the provisions and requirements of IEC 62196-2 IEC 2010 SHEET 2-lle. Product assembly conforms to IEC charging mode 3 connection mode... |
Same products
 |
LOW SPEED PLASTIC CRUSHER | Seller: GuangDong Soxi Intelligent Equipment Co., Ltd. | Low speed plastic granulator is especially suitable for crushing and reusing all kinds of hard pl... |
 |
IMM INJECTION MOLDING MACHINE | Seller: GuangDong Soxi Intelligent Equipment Co., Ltd. | Soxi's reaction molding technology encompasses foaming machines, foaming mold fixtures and lines ... |
 |
PLASTIC DRYER BY SOXI: ALWAYS THE RIGHT CHOICE | Seller: GuangDong Soxi Intelligent Equipment Co., Ltd. | Soxi is one of the top plastic material dryer manufacturers , our plastic dryer machine will avoi... |
 |
INDUSRIAL CHILLER MACHINE BY SOXI | Seller: GuangDong Soxi Intelligent Equipment Co., Ltd. | INDUSRIAL CHILLER MACHINE BY SOXI Soxi is one of the top industrial chiller machine manufacturers... |
 |
HOT AND COLD INTEGRATED MOLD TEMPERATURE CONTROLLER | Seller: GuangDong Soxi Intelligent Equipment Co., Ltd. | The cooling and heating integrated machines are equipped with cold water and hot water channels, ... |
