Gasoline oxidation stability teste

The instrument is designed and made as per GB/T8018, ISO5736,ASTM D525, DIN51781

Function characteristics

1,Oxidation stability analyzer, automatic petrol computer control technology, automatic detection, calculation and control, The whole operation is simple, control precision, High degree of automation, a series of advantages.

2, Fully automatic analyzer of oxidation stability of gasoline using the most advanced USB interface with a computer connected, simple to use.

3,Changed the traditional water bath for the metal bath, no pollution, no need to pay, the operation is more convenient to use.

4, To improve the design of the insulation system, both to save energy and avoid the risk of burn injury to the operator.

5, The integrated design of the test oxygen bomb assembly, not only greatly reduce the oil and gas pressure test tubing, pressure detection more accurate, and Since High tightness manual use of the needle valve, you can ensure that the testing process oxygen bomb good seal.

Technical parameters

1，Heating tube power: 1600W, The actual heating power is controlled automatically by a computer; ,

2，Control Point: 100 ° C ± 1°C,Temperature of The metal bath;

3, Oxygen bomb pressure transmitter measuring range: 0 to 1600kPa accuracy of ± 0.2%;

4, Thermometer: equipped with mercury-in-glass Thermometer, you can immediately necessary correction department degree;

5,Ambient temperature: less than or equal to30 °C; ,

6,Ambient humidity: less than or equal to80%;

7, power supply: AC220V ± 10%, 50Hz;

Other supplier products

	Diesel oil cetane rating analyzer cetane number analyzer	Cetane machine in accordance with ASTM D613, GB/T386 or standards fixed ignition lag measured cetane number of diesel and biodiesel, this product i...
	Octane number analyzer (motor / research method)	Gasoline octane (gasoline label) is used to indicate a contract value of gasoline antiknock properties of motor gasoline the most important indicat...
	Rapid low temperature Closed Cup Flash Point tester
	Automatic Cleveland Open Cup Flash Point Tester	Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79° C (175&...
	Portable octane number analyzer	Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...