.

GD-265H Widely Used Viscosity Measurement Equipment

Introduction:
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’s Republic of ChinaSY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester,GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosityandASTM D445Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
» GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis suitable to determine kinematic viscosity of liquid petroleum products (Newtonian fluids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.
Main Technical Features:
  • Single chip microcomputer and colored LCD technology. High intelligenceand automation.
  • Intelligent signal sampling, data measuring, parameters operating, and result output. All the operations are finished automatically.English man-machine conversation interface. Easy to operate.
  • The instrument is equipped with timing function. It can choose valid flowing time period and calculate arithmetic average automatically. It can also preset the viscosity coefficient , calculate the viscosity after the test and print the test results automatically.
  • It can do one test alone or doing two tests at one time by setting the parameters.High efficiency.
  • It has the parameters saving function. The instrument will automatically save the parameters of capillary tube diameter, coefficient and so on after these parameters being setted. When doing test with the same capillary, no need to set these parameters again.
  • It adopts desktop and all-in-one machine design. Convenient to use.
Main Technical Specs:
1
Power supply
AC(220±10%)V, 50Hz
2
Bath heating power
1700W
3
Temperature range
Room temperature~100.0℃
4
Temperature control accuracy
±0.01℃
5
Bath volume
20L
6
Timing range
0.0s~9999.9s
7
Timing accuracy
±0.05% within 60min
8
Amount of capillary viscometer tubes
4 capillary viscometers
9
Stirring motor
Power 6W, rotating rate 1200RPM
10
Working condition
ambient temperature-10℃~35℃, RH: ≤85%
11
Temperature sensor
RTD, Pt100
12
Maximum power consumption
1800W
13
Capillary viscometers tubes(Pinkevitch viscometer)
7 pieces in total.The inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
14
Dimension
530mm×400mm×670mm


Send product request

To: 67165
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

GD-265H Widely Used Viscosity Measurement Equipment
GD-265H Widely Used Viscosity Measurement Equipment Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’...
GDGS Tan Delta Test Set for Electrical Equipments
GDGS Tan Delta Test Set for Electrical Equipments 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate...
GD-261 Pensky-Martens Closed Cup Flash Point Tester
GD-261 Pensky-Martens Closed Cup Flash Point Tester Summary This instrument is designed and manufactured as per standardsGB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup methoda...
GDJ-8S Rotational Viscometer
GDJ-8S Rotational Viscometer I. Summary  The instrument adopts advanced mechanical design technologies, manufacturing techniques, and microcomputer controlling techniques, so i...
GD-265-3 Automatic Capillary Viscometer Washer
GD-265-3 Automatic Capillary Viscometer Washer Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...