Automatic acid number tester (Reflux method)
Scope
This instrument with ATMEL microprocessor core, mechanical, optoelectronic, electrochemical and micro-detection technology in one, using the most advanced digital optical detection system, automatic completion determining transformer oil acid value, the experimental results to standardize the format automatically printouts. The instrument reasonable structure, stable performance, simple operation, is an ideal detection equipment.
Features
1, the instrument is fully in accordance with GB / T7599-87 standard design and development, for domestic initiative, can accurately detect transformer oil, turbine oil, fuel oil and other petroleum products, anti-acid number of automatic test equipment.
2, no manual weighing just a sample placed in a specimen cup, the device will automatically injections, heated to reflux, determined to exclude waste, print the results display and other operations, reduce operator exposure sample and reagent, maximize the protection of their personal safety.
3, measurement instrument automatically deducted ethanol indicator background value and the background value, the result is more accurate.
4, instrument calibration instrument equipped with standard acid and calibration procedures, the user can at any time and in liquid instruments and calibration, and the solution used to overcome the changes in the concentration of defects and improve the reliability of test results.
5, the start time can be measured from 1 to 3 samples, easy to use, high efficiency
6, automatic detection end of the experiment: The color indicator measurement, automatic detection of the end of the color (color value can be set), and the same human judgment. (Recognizes three indicator)
Technical Parameters
1, applies to GB / T7599-87, GB / T264-83 standard.
2, the test range: 0.002 ~ 1mg KOH / g
3, the measurement error: ≤ ± 0.005 mg KOH / g
5, Temperature: 10 ℃ ~ 45 ℃
6, for humidity: <85% RH
7, power supply: AC220V / 50Hz
8, Power: 500W
Send product request
Other supplier products
 |
Automatic surface tensiometer | Scope Surface tensiometer according to national standard GB / T6541 provisions of design and manufacture. Automatic interfacial tension meter ring ... |
 |
Automatic volume resistivity tester | Scope Automatic volume resistivity tester is based People's Republic of China Electric Power Industry Standard DL / T421-2009 requirements of desig... |
 |
Lubricant oil rust preventing characteristics tester | Scope Lubricant liquid rust meter according to national standard GB / T11143 prescribed design and manufacture of metal corrosion can be determined... |
 |
FDT-0301 Pour point of petroleum products tester | Scope Pour point tester of petroleum products in accordance with the national standard GB / T510 provisions "Determination of the pour point of pe... |
 |
FDT-0233 Automatic low temperature closed cup Flash Point Tester | Scope Standard GB / T261-83 and ISO2719-1988 international standards. Features 1, large-screen LCD, friendly user interface 2, also has a fault of ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
