Automatic volume resistivity tester
Scope
Automatic volume resistivity tester is based People's Republic of China Electric Power Industry Standard DL / T421-2009 requirements of design and manufacture. Fully compliant with the latest standards, it is to replace the old standard equipment, the best choice
Features
1, with three terminal electrodes cup, completely DL / T421-2009 requirements and design
2, with color LCD display, touch screen operation
3, with integrated design, temperature refrigeration in one range more widely
4, with automatic drain system, reduce labor intensity
5, adopt automatic discharge, using the classic PID temperature control, automatic climate control, automatic measurements with save, print function test results.
Technical Parameters
1, the test range: 5.0E5 ~ 5E13 Ω · m.
2, temperature range: the range of 20 ° ~ 99 degrees of freedom settings, temperature control accuracy of ± 0.5 °.
3, holding time: 0 to 99 minutes in any setting
4, pressing time: arbitrarily set within 0 ~ 99S.
5, the number of experiments: 1 to 3 times a set, automatically calculate the average after the end of the experiment
6, the electrode cup Parameters: Type: Three-side electrode cup, internal and external dual temperature control, material: high-purity stainless steel
7, electrode spacing: 2mm
8, electrode capacitance value Cup: 30PF
9, empty cup Insulation resistance:> 3.0E12Ω
10, Repeatability: results> 1.0E10Ω · m, the relative error of <25%
The results ≤1.0E10Ω · m, the relative error of <15%
The results ≤1.0E10Ω · m, the relative error of <25%
12, the test voltage: DC 500 ± 5% V
13, suitable humidity: 30% to 70%.
14, power supply: AC220V ± 10%, 50HZ ± 5%
15, Power: less than 600W
Send product request
Other supplier products
 |
Insulating oil dielectric strength tester transformer oil breakdown voltage tester | Scope This equipment according to GB/ T507 and industry standards DL429.9 national standard GB designed and manufactured, using a special software ... |
 |
lubricant oil foaming characteristics tester | Scope Lubricant foam performance tester is based on national standards GB / T12579 design and manufacture of the provisions for the determination o... |
 |
FDQ- 1271 Mercaptan sulfur analyzer | Scope Mercaptan sulfur analyzer by automatic potentiometric titration principle, under computer control, petroleum products Determination of mercap... |
 |
FDT-0233 Automatic low temperature closed cup Flash Point Tester | Scope Standard GB / T261-83 and ISO2719-1988 international standards. Features 1, large-screen LCD, friendly user interface 2, also has a fault of ... |
 |
FDT-0131 Automatic opening flash point tester | Scope Automatic opening flash point tester is based on ASTM D92, GB / T3536 standard "of petroleum products of flash and fire assay (Cleveland open... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
