Medical Face Mask Synthetic Blood Penetration Resistance Tester
Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood at different test pressures,and can also be used to determine the resistance to blood penetration of other coating materials.
Application
The device is used for anti-synthetic blood penetration of medical surgical masks, and mainly used in the field of medical protection products. It can also be used for other textile coating material determination.
GB 19083-2010Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood.
YY/T 0691-2008Clothing for protection against infectious agents-Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
YY 0469-2011Technical requirements of medical face masks– Blood penetration test apparatus.
ISO 22609：2004Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
ASTM F1862-07Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Know Velocity)
YY/T 0691-2008Clothing for protection against infectious agents-Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
YY 0469-2011Technical requirements of medical face masks– Blood penetration test apparatus.
ISO 22609：2004Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
ASTM F1862-07Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Know Velocity)
| Items | Parameters |
| Injection distance | 300mm～305mm, adjustable |
| Nozzle diameter | 0.84mm |
| Jet velocity | 450cm/s,550cm/s,635cm/s |
Standards
1.The protruding sample fixture can simulate the actual use condition of the mask. Reserve the test target area without destroying the sample, and distribute synthetic blood in the sample target area.
2.A special jet device with constant pressure can spray a certain volume of synthetic blood in a controlled time.
3.It can fully simulate the corresponding injection rate to test under the average blood pressure of the human body at 10.6kPa, 16kPa, 21.3kPa.
4.The fixed target plate can block the high pressure part of the injected liquid flow to allow the steady flow to be sprayed to the sample, increasing the accuracy and repeatability of liquid spraying speed.
Send product request
Other supplier products
 |
Medical Face Masks filter material Particulate filtration efficiency tester | Medical Face Masks filter material Particulate filtration efficiency tester is used for performance testing of filter elements, disposable masks, f... |
 |
Smoke Toxicity Tester | Code for Gaseous Toxicity Caused by Combustion of Cable Materials in NES Standard of British Naval Engineering. Toxicity refers to a property that ... |
 |
Velcro Fatigue Tester and velcro fatigue testing machines | Velcro Fatigue Testeris designed for opening and closing the hook and loop fasteners, A hook and loop fastener is repeatedly opened and closed for ... |
 |
Medical Face Mask Synthetic Blood Penetration Resistance Tester | Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ... |
 |
Fabric Scorch Sublimation Tester | Product Information: Scorch/Sublimation Tester is used to determine color fastness and shrinkage to hot pressing and dry heat and to conduct subli... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
