Chrysler Bending Test instruments

• 

Brief Introduction
Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,
ie mechanical stability of the coating.Design Basis Chrysler laboratory test method LP-463LB-9-01.
This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material.
Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking,
lamellar separation of vinyl and other soft furnishings and other materials

Product Description：
A tester simultaneously tests four samples, including three bend specimens and a folded specimen.
When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,
the bending test.The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.
If possible, close the flat to exert the appropriate pressure.Bend specimens’ tension with a fixed weight. Tension must be controlled.

Technical Parameter
1. Desktop;

2. Bending test stations: 3 stations;

3. Folding stations: 1 station;

4. Each sample holder may be separately provided on the specimen holder and tension;

5. The rod Working stroke: 70mm; (2.75in.)

6. Fixture spacing: (. 6in) 152mm;

7. Working frequency: 35 times / min;

8. The bending load test: Each sample 36N (8lbf.), Adjustable;

9. The folding load test: After the closure 641N (12lbf.);

10. The bend test specimen size: 76 × 203mm; (3 × 8in.)

11. The folding test sample size: 129 × 129mm; (5 × 5in.)

12. The feature can be manually reset electronic counters;

13. Electronic Counter: 6 digits;

14. Dimensions: 36 × 12 × 20 (length × width × height).

Other supplier products

	taber 5750 abrasion tester	The instrument can test specimens with different sizes and shapes, especially ideal for the abrasion test of specimens with contoured or polished s...
	Zipper Reciprocating Tester	IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma...
	Horizontal flame test chamber	The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for a...
	Fabric Heat Conduction Performance Tester	标准： EN 367-1992？防护服-防热和防火-测试方法：测定暴露于火焰时的热传递率 应用： 产品信息： 该仪器主要用于纺织品、消防用品等材料热导率的测定。特点： ◆仪器能数字显示火焰温度、测量温度、时间。◆燃烧器配有适用于燃烧石油液化气的火焰喷嘴，气孔分布...
	fabric textile martindale abrasion and pilling tester	Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/129...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...