Boiling Test Box

• 

Boiling Test Box

Water Bath Apparatus of Boil Test for Safety Glazing Materials in Building

Water bath apparatus of Boil test for safety glazing materials in Building

Reference Standard: AS/NZS 2208 Safety glazing materials in buildings

Power: 220V 50Hz 3Kw (Customized)

Outside Size: 400mm*255mm*480mm

Inside Size: 400mm*255mm*480mm

At most 6 samples with 300mm*300mm

Glazing Boiling Test Box, High Temperature Test OvenSupplier & Exporter

Scope:

Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling

Principle:

Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects

Apparatus:

The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test

Samples:

Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested. These specimens may be cut from production samples of the size and thickness submitted for impact testing. For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass

Procedure:

1): Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min

2) Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h

3) Remove the specimens and examine for the bubbles and others defects

Yuanchen supply nonstandard metal stamping, sheet metal working, sheet metal fabrication, laser cutting service, safety glass testing equipment, metal bracket, sheet metal bending, sheet metal formingetc. Customized OEM service and Free Sample Confirmed

Other supplier products

	Metal Stamping Support for Wheel Hub Spraying	Metal Stamping Support for Wheel Hub Spraying Material: Carbon SteelThickness: 1mmDia: 210mmHeight:40mmWeight:85g Aluminum Stamping Lids, Nonstan...
	Shim Gasket	Metal Mould：Metal Cutting Die Hole Punch Die MODEL NO.:Customized Metal Cutting Die Punch Die Various of sheet metal moulddesign,develop and pro...
	PV Module Test Equipment	PV Module Test Equipment Mechanical Load Test Apparatus of Crystalline silicon terrestrial photovoltaic (PV) modules Reference Standard: IEC 6121...
	Home Hardware	Home Hardware Nonstandard Punching Deep Drawing Gasketfor Door Lock Handle Material:Stainless Steel Size: 95mm*27mm Thickness:1mm Professional...
	Soft heavy body impact testing impactor of doorset	Soft heavy body impact testing impactor of doorsetReference standard: GB/T 14155-2008 ISO 8270Height: About 600mmDiameter: About 350mm2mm Sand, App...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...