Boiling Test Box
Boiling Test Box
Water Bath Apparatus of Boil Test for Safety Glazing Materials in Building
Water bath apparatus of Boil test for safety glazing materials in Building
Reference Standard: AS/NZS 2208 Safety glazing materials in buildings
Power: 220V 50Hz 3Kw (Customized)
Outside Size: 400mm*255mm*480mm
Inside Size: 400mm*255mm*480mm
At most 6 samples with 300mm*300mm
Glazing Boiling Test Box, High Temperature Test OvenSupplier & Exporter
Scope:
Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling
Principle:
Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and others defects
Apparatus:
The apparatus include two water baths, each of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test
Samples:
Three specimen of size 300mm*300mm manufacture in a manner identical with impact test specimens and of like thickness shall be tested. These specimens may be cut from production samples of the size and thickness submitted for impact testing. For heat strengthened or toughened laminated glass, test specimen may be cut from a similar original sheet of annealed laminated glass
Procedure:
1): Immerse the specimens vertically on edge in a bath of water maintained at a temperature of 66°C±3°C for 3 min
2) Quickly transfer the specimens to a bath of water maintain at boiling point. Immerse the specimens vertically on edge for 2 h
3) Remove the specimens and examine for the bubbles and others defects
Yuanchen supply nonstandard metal stamping, sheet metal working, sheet metal fabrication, laser cutting service, safety glass testing equipment, metal bracket, sheet metal bending, sheet metal formingetc. Customized OEM service and Free Sample Confirmed
在线联系供应商
Other supplier products
 |
Shim Gasket | Shim Gasket：Valve Seal Gasket Carbon Steel Ring MODEL NO.:117mm PRODUCT DETAILS Valve Seal Gasket Carbon Steel Ring Material: Carbon SteelThick... |
 |
Steel Ball | Steel Ball Steel Ball2260g 227g 1040g 508g 227g Steel Ball:2260g±20g 82mm Steel Ball: 1040g ±10g 63mm Steel Ball:508g±3... |
 |
Fence Fitting | Fence Fitting：Galvanized Metal Stamping Connectors Bracket of Building Fence MODEL NO.:Connectors Galvanized Metal Stamping Connectors Bracket of... |
 |
Letters Numbers | Letters Numbers：Metal Letters and Numbers for the Nameplate of Products or Equipment MODEL NO.:6mm Metal Letters and Numbers for the Nameplate of... |
 |
Metal L Brackets OEM Customized | Metal L BracketsOEM Customized Material:Aluminium 5052 / 3003 Size:29.97mm*16.51mm Thickness:1.5mm Weight:5 g Process:Laser Cutting/Stamping/B... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
