dry cleaner equipment for testing
The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.
It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.
Application
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.
Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610Standard for the flammability of clothing textiles.
●Clean the dry cleaning cylinder
●prepare the hardness concentrates according to the relevant standards.
●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
●Get out the sample and remove the excess solution.
| Items | Parameters |
| Dimension | 72L X 49W X 62H (cm) |
| Structure | Stainless steel |
| Surface treatment | Wiredrawing treatment |
| Transport weight | 80kg |
| Power supply | 220V 50HZ max.0.05A |
Send product request
Other supplier products
 |
Factory Price of Mask & Respirator Breathing Resistance Tester | Factory Price of Mask & Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expiratory resistance of respi... |
 |
ASTM F2101 bacterial Filtration Efficiency (BFE)Tester | determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to down... |
|
|
dynamic fatigue testing machine | Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The seam fatig... |
 |
Leather Water Vapor Permeability Tester | Standards:UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009Ap... |
 |
Mask Tensile Testing Machine | IntroductionThe test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration mec... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
