Glow wire tester
Brief Introduction
The glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the standards so called glow wire test method, which apply tothe fire danger test on electrical and electronic products, household electrical appliances and materials,simulation heat element or overload resistance of heat or ignition source caused by thermal stress in a short time.
Product Description
This instrument adopts steel structure of spraying, imported instrument display, easy operation, stable performance,suitable for the quality inspection departments at all levels and relevant enterprises to use fire resistant test.
Technical parameter
1.Heating temperature: 500-1000 or less continuous tunable range, temperature measurement accuracy of plus or minus 10
2.More than burning time: 0.1 999.9 s, plus or minus 0.1 s (adjustable time range)
3.Burning time: 0.1 999.9 s, automatic recording, pause manually
4.Residual flame time: 0.1 999.9 s, automatic recording, pause manually
5.Hot wire for sample pressure. Pressure limiting depth of 7 mm
6.Glow wire: nickel chromium (80%), chromium (20%), the size is made according to the rules.
7. Thermocouple: nickel chromium/nickel aluminum wire, k index
8. Auto off: sample after reaching prescribed burning time, automatically be off from the hot wire
9.Overall dimensions: width,deep,high (1120, 520,520) mm
Product Display
Send product request
Other supplier products
 |
wet penetration textile test instrument | 用于测定材料在机械摩擦过程中抵抗液体中细菌渗透的性能（即材料通过机械摩擦对携带细菌的液体的屏蔽性能）。 适用标准： YY/T 0506.6-2009 病人、临床工作人员和设备用医疗器械手术单、手术衣和洁净服第6部分：抗湿细菌渗透性的试验方法 规格： 旋转速度：（60±1）... |
 |
EN 143 Mask Automatic Filtering Performance Tester | The tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suita... |
|
|
ISO 4920 spray water repellency tester | Spray Rating Tester /Fabric surface waterproof performance tester is designed to determine the surface wetting resistance of any fabrics, which may... |
|
|
Tape abrasion tester | The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, fo... |
 |
Building material burning performance tester | According to GB / T8626, ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the ve... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
