Digital Leather Air Permeability Tester
The specimen is loaded to the test area of the instrument easily by means of an automatic holder. By pressing down the holder to start the test. Air permeability tester equipped with a vacuum pump to draw air through an automatic interchangeable test head with a circular opening. A certain area of leather or textile samples is exerted a certain pressure on the air. The permeability is different, through the gas flow is different. You can test the permeability of the sample through the flow sensor.
Application
Leather acquisition inspection, leather quality inspection.
Test standard
QB/T 2799，GB/T_11603，GB/T4689.22
Features
The use of high-precision ultra-small range of imported electronic flow sensor can test the permeability of leather.
Fast test. The traditional test method takes more than 30 minutes. This tester only need 15 seconds to complete the test.
A key test. Install the sample. Just press a button. You can quickly test.
The instrument with USB interface, you can use the software to count, analyze test the results, and print the standard test report. You can also save the test report as EXCEL format.
Configuration
Standard configuration: host, a power line.
Optional accessories: 1.LABTest analysis software
Test principle
Exert a certain pressure on a certain area of the leather or textile sample air, air permeability through the gas flow is different.
Technical Parameters
Items Parameters
Measuring range 0~2400 ml/(cm2.h)
Measuring accuracy Less than1%
Test time 15 seconds on average
Test areas 10cm2
Specimen diameter 5.5cm
Power AC100-240V 50/60Hz
PC communication USB port connection
Dimensions L520 x W280 x H300mm
Weight 10kg
Pressure 10Pa~2500Pa
Warranty 24 Months
Other supplier products
|
|
Blood penetration resistance tester |
Non-woven Mask synthetic blood Permeability pressure testing equipmentMedical masks synthetic blood penetration tester is used to determine the res... |
|
|
Seal Strip Abrasion Tester |
Seal Strip Abrasion Tester is designed to determine the resistance of car seal strip to abrasion. Test specimens are repeatedly rubbed against spec... |
|
|
AATCC 195 Moisture Management Tester |
Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Moisture management tester is the tool for the measurement, evaluation and classification of... |
|
|
RCA tape scroll abrasion Wear tester |
The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, fo... |
|
|
rca tape friction testing machine |
Tape abrasion test machine make wear test of various surface coating consumption test with mobile , PDA, MP3, CD and laptop, the load 275g, 175g.55... |
All supplier products
Same products
