45 degree automatic textile flammability tester
Testing Standards:
ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644
Applications:
45 degree flammability tester is designed to determine the burning characteristics of textiles. Stainless steel test cabinet with glass observation panel, provided with automatic timing of flame spread in 0.1 second increments from ignition. Ignition timefreeSettings.
Structure:
Flowmeter:Adjust the gas flow size;
Fire tube: The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel:Power- power switch ;Start:Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset:Timer reset /Fire tube reset;
Sample clamp and specimen holder:The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
Timer:Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
Test room size: W368 × D216 × H356mm
Sample shelf angle: 45 °
Flame spread time setting range: 0.01S-99.99S
ignition time of the sample surface: 1.0S ± 0.05S
Body stainless steel structure:
SCM control, control interface friendly, easy to operate
Heavy hammer timing stop device, timing accurate
Standard fire mouth
Accessories and Consumables:
Combustion gas supply Device
50 mercerized cotton sewing machine line
Product Information:
Technical Parameters:
A、Stainless steel test cabinet with glass observation panel.
B、Automatic timing of flame spread in 0.1 second increments.
C、Automatic or manual flame impingement for 1,5 or 20 seconds.
D、Automatic or manual ignition device.
Accessories and Consumables:
1、Brushing Device.
2、Burners(Pack of 5)
Product Display
ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644
Applications:
45 degree flammability tester is designed to determine the burning characteristics of textiles. Stainless steel test cabinet with glass observation panel, provided with automatic timing of flame spread in 0.1 second increments from ignition. Ignition timefreeSettings.
Structure:
Flowmeter:Adjust the gas flow size;
Fire tube: The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel:Power- power switch ;Start:Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset:Timer reset /Fire tube reset;
Sample clamp and specimen holder:The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
Timer:Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
Test room size: W368 × D216 × H356mm
Sample shelf angle: 45 °
Flame spread time setting range: 0.01S-99.99S
ignition time of the sample surface: 1.0S ± 0.05S
Body stainless steel structure:
SCM control, control interface friendly, easy to operate
Heavy hammer timing stop device, timing accurate
Standard fire mouth
Accessories and Consumables:
Combustion gas supply Device
50 mercerized cotton sewing machine line
Product Information:
Technical Parameters:
A、Stainless steel test cabinet with glass observation panel.
B、Automatic timing of flame spread in 0.1 second increments.
C、Automatic or manual flame impingement for 1,5 or 20 seconds.
D、Automatic or manual ignition device.
Accessories and Consumables:
1、Brushing Device.
2、Burners(Pack of 5)
Product Display
Send product request
Other supplier products
Digital Sock Stretch Tester | Digital Sock Stretch Tester Applications:Digital socks stretching instrument used for the determination of the value of performance testing on exte... | |
Quick Fiber Oil Extractor tester | Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and eva... | |
Sweating Guarded Hotplate | Thermal resistance wet resistance tester Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resista... | |
Electronic Twist Tester | Electric Twist Tester Standards: ASTM D1422/1423,BS 2085,DIN 53832,ISO 2061,IWTO 25-70,GB/T 2543.1-2001/2543.2-2001 Applications: TheElectric Twi... | |
AATCC Viewing Board | Standards:American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178.Product Information:1. Utilis... |
Same products
MECHANIC MEC 4K 2K HD Electronic Eyepiece Camera for Stereo Microscope | Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) | Description Mechanic MEC 2K/2K PRO/4K HD Electronic Eyepiece Camera can convert a Binocu... | |
Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester | Seller: PHONEFIX technology Co.,Ltd | iFixes 10CC半透明/全透明/乳白/浅黄色无铅焊膏适用于手机主板CPU BGA维修。iFixes Solder Flux注射器注射焊膏焊膏手机修整焊接耗材系列,适用于电路板纳米芯片、手机... | |
HTT-02 Hot Tack Tester | Seller: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... | |
SPC-01 Stretch Film Peeling Cling Tester | Seller: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... | |
FTT-01 Film Thickness Tester | Seller: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... |