Electrostatic Charge Decay Meter
Static Honest Meter is a measuring instrument for attenuation of static electricity, most appropriate for investigating the diffusibility of static.
This device is used to electrify the specimen by irradiating it by air ions generated by corona discharges initiated by the device, and then, after the irradiation is stopped, it is used to investigate the decay curve of the charge on the specimen.
Standards:
GB/T 12703.1
FZ/T 01042
JIS L1094
Technical Parameters:
Items | Parameters |
The measuring range of electrostatic voltage | 0 ~ 10kV |
The half-life time range | 0 ~ 99.99 h |
Rotation speed | 1500 RPM |
Discharge time | 0 ~ 99.99 s (test is scheduled (30 + 0.1) seconds) |
Discharge distance between needle electrode and specimen | 20mm |
Measurement distance between test probe and specimen | 15mm |
The static voltage calibration was performed before the instrument was issued Check before use. The cylinder must be filled with oil (transformer oil) |
|
Sample size | 60mm x 80mm |
Power | 220V 50Hz 1.5kw |
Send product request
Other supplier products
Seat Static Load Test Bench | Seat Static Load Test Bench is mainly used for testing the comfort of seat and various static loading test of the seat. The main execution standard... | |
ICI Mace Snag Tester | ICI Mace Snag Tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to... | |
AFC-133 Filter Material Test Bench | Technical Parameters: It’s great significant for AFC-133 filter test bench to optimize and develop filter materials, ensure quality assurance... | |
Medical Face Mask Air Exchange Pressure Difference Tester | The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical... | |
din abrasion resistance tester for rubber and plastic | DIN Abrasion tester, which is the original product & is designed to conform to the DIN 53516, DIN ISO 4649. This top quality and highly popular... |
Same products
HTT-02 Hot Tack Tester | Seller: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... | |
SPC-01 Stretch Film Peeling Cling Tester | Seller: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... | |
FTT-01 Film Thickness Tester | Seller: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... | |
TST-01 Tensile Tester | Seller: Cell Instruments Co., Ltd | TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength... | |
HST-01 Heat Seal Tester | Seller: Cell Instruments Co., Ltd | HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces... |