Respirator Flame Retardant Tester
It is the special test equipment mainly used for testing medical masks flame retardant properties.Instrument Description: The device is a mask with a head mold at a certain line speed after contact with the flame, then test the burning performance on masks.
Standards:
GB 19083-2010, EN 149, GB 2626, YY 0469
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm / s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
This EN 149 Full Face Masks Respirator Flame Retardant Tester F149 is intelligent, has a touch-screen control system, able to choose different testing procedures for different specimen, the testing results are automatically recorded and saved.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
Welcome to Contact us!
E-mail:
Whatsapp/
Send product request
Other supplier products
 |
Flame Resistance Chamber Burning Tester For Full Face Masks | Flame Resistance Chamber Burning Tester For Full Face Masks is mainly used for plastic, rubber or film directly measured without burning combustion... |
 |
bfe testing machine | It is suitable for measuring the gas exchange pressure difference of masks, and can also be used to measure the gas exchange pressure difference of... |
 |
air filter pfe test equipment | Air filter pfe test equipment is used for testing the filtration efficiency of particulate matter of melting and spraying cloth, daily protective m... |
 |
protective clothing pressure resistance synthetic blood penetration tester | This protective clothing pressure resistance synthetic blood penetration tester is used to determine the resistance of a protective clothing materi... |
 |
pfe testing machine | N95 Face Mask Material Meltblown Nonwoven Fabric Particle Filtration Efficiency (PFE) Testeris applicable to the performance verification of new pr... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
