Dustproof Testing Machine for IP5X and IP6X

• 

SC-015Dust-proof Test Chamber(Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. After the measurement, it is judged whether the performance of the product meets the requirements through verification, so as to facilitate the design, improvement, verification and factory inspection of the product. Comply meetsIEC60529:1989 +A1:1999 +A2: 2013 ,IEC60598-1,GB2423.37-89(Test L: dust test methods),GB4208, GB/T 4942.2-93(protective casing grade of low-voltage apparatus),GB7000.1 9.2.1, 9.2.2 and Figure 6, DIN40050 and IP5K0. The dust test chamber is applicable to the IP5X and IP6X dustproof test of the products.

Product Model:

PS. Other size or Walk-in Dustproof Chamber can be design according to customer's request.

Specifications:
• Temperature range: RT+10~50ºC
• Standard wire warp of metal net: 50um; Standard spacing between wires: 75um
• Test dust: dry talc powder; Talc powder dosage: 2~4kg/m; Dust reduction method: free dust reduction
• Total test time: 0~999H (adjustable); vibration time: 0~999H (adjustable); timing accuracy: ±1 second
• Vacuum: 0~10Kpa (adjustable); Pumping speed: 0~4800L/H (adjustable)
• Power supply of test samples: single-phase 220V/50Hz or 100V/60Hz
• Safety protection function: leakage protection, short circuit protection
• The shell is made of domestic high-quality steel plate, and the surface is sprayed with paint, which is beautiful and durable.
• The inner box, sample rack, etc. are made of stainless steel plates to ensure that they will not rust for a long time.
• There is a transparent observation window (toughened glass material) on the door, and an LED lighting lamp is installed in the box to facilitate the observation of the internal test situation.
• There is a device for replacing dust at the bottom of the device, which can easily 100% replace the used dust.
• A special device is installed to ensure that the dust does not stick to the wall and condense. The working time of the device is adjustable, and it can work automatically and alternately.
• There is a suction pipe in the box, which can complete the vacuum action on the sample (require the sample to reserve the suction hole position).
• Dust chamber testing control system: 7-inch touch screen + Panasonic PLC. The dust blower, dust vibration and total test time can be controlled separately. This controller has the following various arbitrary setting control functions:
1. Dust blowing time (stop, blowing): can arbitrarily choose any of continuous and periodic dust blowing time to setting;
2. Vibration time: vibration and stop vibration time are automatically alternated;
3. Preset test time: the maximum test time is 99 hours and 59 minutes;
• Heating system: The circulating air duct is equipped with a heater to heat the dust to avoid dust condensation. The heat of the muffler mica sheet heating ring is safe and stable.
• Vacuum system: equipped with vacuum pump, vacuum pressure, air filtration, flow meter, pressure regulating triplet, connecting pipe.

Other supplier products

	Automatic Electrical Safety Tester	LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according toGB/T 24825-2009 andIEC 62384...
	High Precision Rotation Luminaire Goniospectroradiometer	LSG-1890BCCD/LSG-1800ACCD goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measur...
	Waterproof Test Machine for IPX1 to IPX8	JL-X waterproof test machine is according toIEC60529:1989 +A1:1999 +A2:2013 Degrees of protection provided by enclosures(IP Code),IEC60598, IEC6033...
	High Precision Spectroradiometer Integrating Sphere System	LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED's quality should...
	Lamp Start, Run-up time and Flicker Test	LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer - Flicker Tester is equipped with Class A fast photometric probe, so the sampling spee...

Same products

	MECHANIC MEC 4K 2K HD Electronic Eyepiece Camera for Stereo Microscope	Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX)	Description Mechanic MEC 2K/2K PRO/4K HD Electronic Eyepiece Camera can convert a Binocu...
	Fluke 15B+ 17B+ 18B+ Digital Multimeter Voltage Frequency Tester	Seller: PHONEFIX technology Co.,Ltd	iFixes 10CC半透明/全透明/乳白/浅黄色无铅焊膏适用于手机主板CPU BGA维修。iFixes Solder Flux注射器注射焊膏焊膏手机修整焊接耗材系列，适用于电路板纳米芯片、手机...
	HTT-02 Hot Tack Tester	Seller: Cell Instruments Co., Ltd	The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
	SPC-01 Stretch Film Peeling Cling Tester	Seller: Cell Instruments Co., Ltd	The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
	FTT-01 Film Thickness Tester	Seller: Cell Instruments Co., Ltd	The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...