Fabric thermal protection radiation performance tester
Fabric thermal protection radiation performance tester
Standards:
ISO 6942
Product description:
Thermal protection performance tester used for the determination heat radiation performance of the single or multi-layer fabric in high temperature environment.
The heat radiation performance is an important performance index of flame retardant products, accurate determination of its protective properties, which it is very
important to select materials, research new products and improve the processing technology.
Method A: The sample is mounted in a separate frame and exposed to a heat radiation source for a certain time. The intensity of the thermal radiation is controlled by
adjusting the distance between the sample and the radiation source. After the test, the visual changes at each level of the sample were examined.
Method B: The sample is fixed to a calorimeter and exposed to a thermal radiation source. The time required for the temperature of the calorimeter to rise by 12°C and 24°C, respectively, was measured.
On the basis of these data, the heat flux rate is calculated by the difference of the heat fluxes between the transfer and the incident.
The cooling system provides a continuous flow of water fromthe inlet and outlet of the testing machine.
Technical Parameters:
Samples: textiles
Test standard: DIN EN ISO 6942
Sensors: Calorimeters
Power supply: 3 ~ 400 VAC / 12.5 kVA
Equipment Dimensions: 2000 x 800 x 1500 mm (W*D*H)
Weight: 150 kg
Other supplier products
|
|
Fabric Tensile Tester |
Fabric tensile tester is suitable for testing the tensile and elastic properties of the high elastic fabric and the low elastic fabric such as the ... |
|
|
Glow Wire Tester |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
|
|
Color fastness tester Resistant to scrub |
Color fastness tester Resistant to scrubApplication:Color fastness to washing used for all types of colored textiles dry and wet friction color fas... |
|
|
Foam repeated compression testing machine |
Product Description:
Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression ... |
|
|
Automotive connector insertion and withdrawal force testing machine |
Main parameters:
1, load: 50kg, 20Kg, 10Kg, 5Kg optional
2, minimum resolution: 0.01
3, the maximum measurement height: 150mm
4, the minimum fi... |
All supplier products
Same products
