MST clothing pressure tester

The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or

in the laboratory to easily measure the pressure of elastic bandages and clothing in

medicine, sports, fashion and other fields.

　　Starting with the MST Mark V version, software updates are available for additional

features. MST Mark III and later, MPT-4, and MPT-7 can also be connected without a

software update.

Scope of application

　　1. Foot, knee, elbow bandages, etc.;

　　2. Scarves, sleeves, tubes, tights, leggings, sweatpants, belly belts, back supports;

　　3. Functional underwear, sports bra, compression shirt, cycling shorts, shapewear;

　　4. Full body sportswear, space suit, hospital protective suit, rescue suit, military

uniform, military uniform, etc.

　　The MPT-4 has four multipoint probes and can also be directly connected to all older

MST Mark X versions.

　　The MPT-7 has seven multipoint probes and is recommended for use with MST Mark

V devices. The MPT-7 can only operate to a limited degree on the older MST Mark X

versions because they only have six measuring points.

Main parameter

　　Multi-point probe:

　　1. Diameter :50 mm;

　　2. Tube length :1000 mm;

　　3. Maximum pressure :80 mm Hg or 10.6 kpa;

　　4. Measuring range :55-70 mm Hg or 0.7-9.3 kpa;

　　5. Features: waterproof, washable, sterilizable.

　　Electrical connection data:

　　1. Input voltage range :100-240VAC;

　　2. Input frequency :50-60 Hz;

　　3. Power consumption :35 watts.

Other supplier products

	Automatic freezing point pour point cold tester	Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...
	Vacuum Ball - Disk Friction Tester	Standards ASTMD4172-94 ASTMD2266-91 SH/T0189-92 Main Purposes The vacuum ball - disk friction tester is a device specifically used for evaluat...
	Dynamic Shoe Waterproof Bending Tester	Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter...
	Building Material Non-Combustibility Test Machine, ASTM E2652, En ISO 1182	Introduction: This machine is designed and manfacture according to ISO 1182 .Furnace temperature can quickly reach temperature equilibrium into th...
	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...