Battery combustion tester
Battery combustion tester used for battery fire resistance, battery combustion
injection test. The battery combustion testing machine is to fix the screen at 38.1mm
above the top of the burner, the screen has 20 holes every 25.4mm, the steel wire
diameter is 0.43mm, ignite the burner, and observe the battery burning until the
battery explodes or the battery burns, and time the combustion process.
Meet the standard
UL2272-2016, UL2271-2013, GB/T31241-2014, GB/T18287-2013, GBT 8894.4-2008,
YD/T 2344.1-2011, GB/T31485-2015, etc.
Technical parameter
1. Burner: Bunsen burner, the inner diameter of the tube is 9.5mm, the length is
about 100 mm
2. Flame application time :0-999.9 s 0.1 s
3. Test round hole surface diameter :102mm
4.Test mesh screen: A mesh screen consisting of 0.43mm(0.017inch) diameter
stainless steel wire woven with 20 mesh per US inch
5. Flame distance from screen height :38mm
6. Octagonal net cover width: the distance between each side is 24 "（610mm），
octagonal, and the eight sides are movable for easy replacement and disassembly
7. Octagonal net cover height :12 "（305mm）
8. Octagonal cover material: aluminum mesh, consisting of 0.010inch（0.25mm）
diameter of aluminum wire woven into a net containing 16-18 mesh per inch
9. Protective box size: about 730x740x500mm
10. Box material: inner box stainless steel, high temperature resistance,
insulation, corrosion resistance, outer box cold rolled steel paint treatment
11. Visual observation window :150x150mm, multi-layer tempered glass and
equipped with stainless steel mesh
12. Ventilation: The rear side of the box has a fan and ventilation inside the box
13. Combustion gas: methane or LPG （customer's own）
14. Power supply :AC220V, 50Hz
15. Equipment weight: about 100kg
Send product request
Other supplier products
 |
Car seat headrest static strength tester | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static strength... |
 |
Random Tumble Pilling Tester | G227T Random Tumble Pilling Tester-Two-box and four-box can be configured. It is mainly used in evaluating the pilling performance of textiles. The... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe... |
 |
Contact Heat Resistance Evaluation Tester | Product Details The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time r... |
 |
Salt fog corrosion resistance tester | Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
