45 Degrees Wire and Cable Burning Testing Equipment
Introduction:
The 45 degrees wire and cable burning instrument is designed to assess the flammability characteristics of single insulated wires and cables. This essential testing device plays a crucial role in ensuring the safety and reliability of electrical wiring across various applications, including automotive, industrial, and consumer electronics.
The instrument typically features a specimen holder that clamps the wire or cable at a precise 45-degree angle. A standardized Bunsen burner with specific dimensions and flame characteristics is then positioned to apply a controlled flame to the specimen for a predetermined period. The angle of 45 degrees is critical as it simulates a realistic scenario where flames might propagate along a tilted cable.
During the test, the operator observes the burning behavior of the wire or cable, noting parameters such as the flame propagation distance, the time it takes for the flame to extinguish (if it does), and the extent of damage to the insulation. These observations help determine the cable's resistance to flame spread and its ability to self-extinguish, which are key indicators of its fire safety performance.
Compliance with international standards like ISO 6722 for automotive wiring and IEC 60332 for general electrical cables is often a primary goal of this testing. The 45 degrees burning test is a fundamental method for evaluating the effectiveness of flame-retardant materials used in wire and cable insulation, ensuring that they meet the required safety and regulatory guidelines for their intended use.
Main technical parameters：
Type: touch screen automatic
Sample length: 600 ± 25mm
Fuel: methane gas or gas (own)
Flame application time: 0 —— 999.9S can be set arbitrarily
Afterburning time: 0 —— 999.9S
Flame length: inner flame 50 outer flame 100
Combustion box size: 550mm x 300mm x 700mm, with transparent glass window in front, you can observe the burning situation of the pattern
Equipment dimensions: 840mm x 300mm x 700mm
Nozzle diameter: 9mm
Blowtorch length: 100mm
The equipment is controlled by the touch screen automatic control system, the high pressure ignition is automatically calculated, the flame is automatically extinguished, and the test data can be saved
Complete configuration: control box, combustion box, burner, solenoid valve, high pressure igniter, gas pipe and signal control line group.
Send product request
Other supplier products
 |
Photovoltaic module backplane peeling strength testing machine | Introduction: The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength... |
 |
Fiber Blend Ratio Tester | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Building Materials Monomer Combustion test Dust Removal Equipment | Product details In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment.... |
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
Yarn twist tester machine | Standards ASTM D1422/1423.BS 2085.DIN 53832.ISO 2061.IWTO 25-70.GB/T 2543.1-2001/2543.2-2001 Application Twist Tester, is used to getthe coeffic... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
