Ruhr conical joint multi-function tester
Product introduction
It is mainly used to test the leakage, gas, separation force, unscrewing torque, easy assembly, resistance to slip wire, stress cracking and other performance indicators of syringes, injection needles, infusion sets, blood transfusions, infusion needles, catheters, anesthesia filters and other medical devices （Luer） conical joints （locked and non-locked）。
Meet the standard
GB/T1962.1-2015, GBT1962.2-2001, ISO 80369, etc.
Technical parameter
Nominal capacity :1mL—60mL Optional
Axial force :0—100N, error ≤ 0.5%
Separation force :20N—40N, error ≤ 1%
Internal water pressure :200kPa—400kPa, error ≤ 0.5%
Torque :0.01N·m—0.5N·m, error ≤ 0.5%
Hold time :1—60s Any setting, error ≤ 1S
Dimensions :450mm*350mm*400mm
Weight :28kg
Send product request
Other supplier products
 |
Catheter Balloon Inflation Diameter Tester | Standards ISO5367. YY0337.1 - 2002. GB/T15812.1 - 2005. YY 0321.1 - 2009. YY/T 0321.2 - 2021. YY 0321.3 - 2009. and YY0285.6. etc. Main Uses The... |
 |
Coatings Shear Fatigue Tester | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
Oxidizing Solids Tester | Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 34.4.1 Test O.1: Test for ... |
 |
Molten metal splash penetration resistance analyzer | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
