Print friction tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Meet the standard:
GB/T 7706-2008
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N（different pressure can be customized）
Friction speed: 21, 43, 85, 106r/min adjustable
Friction area: 100（L）mm×50（B）mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230（L）mm×50（B）mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
Send product request
Other supplier products
 |
Gas Hazardous Characteristics Tester | This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mix... |
 |
Fire retardant coating tester | Product Introduction: The tester conforms to the technical indicators and requirements specified in the national standard GB12441-2005. and is sui... |
 |
Seat Bumping and Creep Test Bench | This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car seat bumping... |
 |
Elastic Tape Fatigue Testing Machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Standards: SATRA TM103 Appli... |
 |
Torque - to - Failure Tester for Metal Bone - connecting Screws | Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai... |
Same products
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Seller: Kelilong Electron Co.,Ltd | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
 |
PH-808 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-808 Range PH ～14.00PH Temp 0～50℃ ... |
