Metal Wire Torsion Tester
Applicable standards:
GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method"
GB/T 239.2-2012 "Metal materials wire Part II Bidirectional torsion test method"
ISO 7800:2003 "Test method for unidirectional torsion of metal wires"
ISO 9649:1990 Test method for bidirectional torsion of metal wires
Test principle:
Unidirectional torsion: The sample rotates 360 degrees evenly around its axis in one direction as a single torsion to the specified number of times or the sample breaks.
Two-way torsion: the sample rotates 360 degrees evenly around its axis in one direction as a torsion to the specified number of times, and then rotates the same number of times in the opposite direction or the sample breaks.
Main parameters:
1, clamping metal wire diameter range: 3.0≤d（D）<5.0
2, the space between the two fixtures: 500mm
3. Clamp range: 3.0-5.0mm
4, twisting speed: 30, 60r/min
5. Power supply: AC220V 50Hz
6, Noise: <70 dB（A）
Send product request
Other supplier products
 |
Battery Powder resistivity meter | Product Advantages Unmatched Measurement Flexibility Dual-probe compatibility: Switch seamlessly betweenfour-point probe(for low-resistance m... |
 |
Fabric light transmittance test machine | Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading proper... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Circular Locus Pilling Tester | Standard GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory methodJIGBell-type gas flow standard device ve... |
 |
Falling ball impact meter | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
