Luggage rod reciprocating fatigue testing machine
Product Introduction:
Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap generated by the tie rod, loosening, connecting rod failure, deformation, etc.
Design criteria:
QB/T 2919-2010
Theory：
luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.
Usage：
Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.
Technical parameters:
Test travel 20——100cm, adjustable
Maximum drawing speed 0——10 cm/sec, adjustable
Maximum compression speed 0——10 cm/sec, adjustable
Test times 0——999999 times automatic stop
Test the power cylinder
Sensing position Four-point sensing position
The maximum height of the specimen is 100cm
Auxiliary equipment case fixing clamp
Use pressure 5——8kg/cm2
Machine size 80X90X180cm (WXDXH)
The weight is about 120kg
Use power supply AC220V, 50/60Hz, 5A
include 1-6 specified parts:
1、Sample clamp holder: adjust the test size
2、pull rod holder
3、Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable
4、support frame：the height is not less than 1500 mm, Install pulling, pressing travel guide
5、pull rod lock switch gear
6、counter：count the movement times
Send product request
Other supplier products
 |
" Helmets Vertical SpacingInfrared - positioning Tester" | Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-... |
 |
Diaper impurity testing machine | Introduction: The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irradiation. ... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec... |
 |
Metal Corrosivity Tester | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
 |
Protective Clothing Synthetic Blood Penetration meter | Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressu... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
