Automotive Interior Materials Droplet Characteristics Tester
Standards:
1. 1995L0028-EN-01.01.2007-002.001-25 ( ANNEX V) Measurement method of melting properties. 2. NF P92-505 Dripping test with electrical radiator, used for melting materials. 3. EU 95/28/EC European parliament and of the council of 24 October 1995 relating to the burning behavior of materials used in the interior construction of certain categories of motor vehicle.
Applications:
It’s used to evaluate the melt dripping and burning performance for hot melt materials under the main heat source.
Product Information:
Introduction
Automotive interior materials droplet characteristics tester determine the materials’ droplet properties according to ECE R118 Appendix 7. This mechanical and electrical control tester is suitable for measuring the melting state of automotive interior materials in the specified radiation heat radiation.
Technical Parameter
| Items | Parameters |
| Power output of radiation heat source | 500W |
| Radiating surface of radiation heat source | Transparent glass plate, Φ (100 ± 5) mm |
| Sample support: | Φ118mm stainless steel ring with φ0.70mm, 2.10mm mesh stainless steel mesh in it. |
| residue container | Inner diameter 118mm, depth 12mm |
| Sample size | 70×70(mm), The thickness is no more than 13 mm |
| Distancefrom residue container to the sample rack | 300mm |
| The range of heat flux meter | 10W/cm2 |
| working power supply | AC220V, 50Hz, ≤1000W |
| The distance from the surface of the specimen to the surface of the radiation source | 30mm |
| Dimension | (Wide) 1120mm×(Depth)520mm×(Height)1250mm, vent hole Φ 100mm |
Send product request
Other supplier products
 |
G354B toilet paper dispersibility testing machine | G354B toilet paper dispersibility testing machine - Other test instrument - standard Product Introduction: G354B toilet paper dispersibility test... |
 |
Cylindricity Tester | Performance Overview: The cylindrical instrument can measure the roundness, cylindricity, straightness, concentricity, coaxiality, flatness, paral... |
 |
Electrode tortuosity tester & diaphragm ion conductivity tester | Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit... |
 |
Lamp Anti-aging Test Chamber | Applications: The machine is used to test the degree of cold resistance for the finished shoes, rubber, plastic, soles, synthetic leather and ot... |
 |
Slip Resistance Tester | Standards 1. ASTM F2913standard test method for measuring the coefficient of friction for evaluation of slip performance of footwear and test sur... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
