Creep testing machine with full incision

Standard

ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress.

ASTM D2990: Configurable for tensile, compressive, and flexural creep testing of polymers and composites.

Product Advantages

1. Uncompromising Precision

Independent 6-Zone Control: Each station operates with ±1% force accuracy (0–2.000N) and ±0.1°C temperature stability.

Hybrid Loading System: Combines motorized force application with manual fine-tuning via touchscreen-guided weights.

2. Versatile Testing Environments

Dual Bath Compatibility: Switch between water (up to 95°C) and oil (up to 150°C) baths for high-temperature polymer analysis.

Expanded Force Capacity: Upgradeable to 4.000N max. load per station for heavy-duty applications.

3. Intelligent Monitoring

Auto-Level Sensing: Real-time solution height detection prevents test interruptions from evaporation or leaks.

Visual Alerts: Touchscreen displays color-coded status indicators for all stations.

4. Future-Ready Design

Modular Architecture: Add stations or upgrade controllers without replacing the entire system.

Multi-Language Interface: Operate in English, German, Chinese, or Spanish.

Product Features

Precision Actuation:

Servo-hydraulic loading with 0.001mm/min creep resolution.

Manual override mode for delicate sample alignment.

Advanced Thermal Management:

Independent PID-controlled heating elements per station.

Magnetic stirrers ensure uniform bath temperature (±0.2°C).

Data Integrity:

100Hz sampling rate captures transient creep events.

AES-256 encrypted data logging with timestamped audit trails.

Ease of Use:

10.4” industrial touchscreen with gesture control.

Pre-loaded ISO 16770 test protocols with customizable hold times.

Technical Parameters

Specification	Details
Stations	6 fully independent test positions
Force Range (per station)	0–2,000N (standard) / 0–4,000N (optional)
Temperature Control	Water: 40–95°C
Force Accuracy	±1% FS (0.5% with calibration kit)
Power Supply	220V/50Hz (110V/60Hz available)
Bath Capacity	15L per station (90L total)
Dimensions (W×D×H)	1,800mm × 750mm × 1,650mm
Weight	380 kg (net)

Other supplier products

	Shoe heat insulation testing machine -- sand bath/ Sand Bath Thermal Conductivity Tester / Shoe Heat Insulation Tester	Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard f...
	Upper Leather Flexing Tester	Main uses: VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piec...
	Differential Scanning Calorimetry Tester	Scope of application: It is used to analyze the thermal effect and corresponding temperature when the physical or chemical properties of organic a...
	Paper quantitative tester	Paper dust meter - Other test instrument - standard Product Introduction: The circular square quantitative sampler （referred to as quantitative s...
	Automatic voltage internal resistance tester	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...