Stain resistance tester for architectural coatings
Product Introduction:
The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often use some neutral detergent to scrub the coating to remove stains, so the coating with good stain resistance is more and more popular.
Architectural coating stain resistance tester is designed and manufactured according to the latest national standard GB/T9780-2013 "Architectural coating stain resistance test method" : The coating stain resistance is evaluated by removing film stain removal rate, using stains as pollution sources, and attached to the coating test board by dip cleaning method or scrape coating method. The pollution resistance test is carried out with specified loads and times. The stain resistance of coated and coated test plates was evaluated by measuring the change of reflection coefficient before and after the test.
This instrument is mainly used to evaluate the antifouling ability of building interior wall coatings after adhesion to primary domestic pollution and scrubbing with neutral detergent. The main purpose is to evaluate the ability of building paint department to resist common domestic pollution. At the same time, the setting and counting of the number of scrubbing resistance of the instrument are displayed by the LCD screen, so that the whole test process is clearer and the operator is more convenient.
Technical parameters:
Friction head （including weight） weight :1500±109
Friction speed :10——99 times/min （any setting）
Friction stroke :300mm
Friction times :0——99999 times （any setting）
Input voltage: AC 220V50Hz
Test plate size: black PVC plastic sheet, size :432mmx165mmx0.25mm
Overall dimensions :590mmx460mmx300mm
Net weight :30 KG
Send product request
Other supplier products
 |
Mask Filter Efficiency Tester | Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with hal... |
 |
Face Mask Filtration Efficiency Tester | Meet the standard: ASTM F2100 ASTM F2299 EN 149 NIOSH 42 CFR Part 84 ISO 16900-3 YY 0469 YY/T 0617 Product Introduction: The primary functi... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1506, ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Moisture Regain Meter | Standards: Applications: The instrument is used for quick determination of sample’s moisture regain. Product Information: The... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
