Safety Helmet Impact Acceleration Tester
Purpose
This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.
Standard
GB / T 2812-2006, GB / T 2811-2007
Technical Parameters for Impact Test
Attributes:
Power electronic
Warranty 1 year
Model HZ-8101B
Tester Standard GB / T 2812-2006, GB / T 2811-2007
Impact Hammer 5 ± 0.1kg
Impact Hammer Diameter 96mm
Puncturing Hammer 3 ± 0.5kg
Length of the Puncturing Hammer 40mm
Puncturing Hammer Diameter 28mm
Hardness of the Puncturing Hammer HRC45
Force Transducer Measuring Range 0- 20KN Drop Height 1000mm Display LED Indicator 20KN
Drop height 1000mm
Display LED digital display
Technical Parameters for Penetration Test
1. Weight of the penetration hammer: 3.0 + 0.05kg
2. Angle of the tip of the penetration hammer: 60±0.5°
3. Minimum length of the tip of the penetration hammer: 40mm
4. Hardness: 50 to 45HRC
5. Penetration height: 1000±5mm
Send product request
Other supplier products
 |
Mask Tensile Testing Machine ISO13934-1 ISO13934-2 | Mask Tensile Testing Machine： The electrical part consists of a load measuring system and a deformation measuring system. All control parameters a... |
 |
Protective Clothing Flame Spread Test Machine | Protective clothing flame spread testeris designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It c... |
 |
Conveyor needle detector | It is applicable to detect broken needle and iron matters inmany industries such as garment, textile, shoes and hats,home textiles, quilting etc. ... |
 |
Contact heat resistance tester | A Contact Heat Resistance Tester is a specialized laboratory instrument designed to measure a material's ability to resist and protect against heat... |
 |
Launder-Ometer Washing Fastness Tester | Testing Standards: ISO 105 C01 C02 C03 C04 C05 C06 C08 D01. BS 1006 C01 C02 C03 C04 C05. AATCC 28 61 86 132 151 190. NEXT TM2 3 5. M&S C4 C5 C... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
