Static pressure and puncture testing machine for safety shoes
Static pressure and puncture testing machine for safety shoes - Other test instrument - standard
Product Information:
Test purpose:
Measure the compression resistance of the shoe head cover and the puncture resistance of the steel plate to prevent the operator from accidental injury when wearing in the workplace due to the insufficient safety performance of the shoe.
The testing machine has the function of speed regulation, the test speed can be arbitrarily adjusted according to customer requirements, and has the function of kg, N, lb three units can be arbitrarily switched, and with a micro printer, the test results can be printed out.
Reference standard:
BS, EN-344, ANSI-Z41, ISO-20344, LD50, GB
Technical parameters:
Pressure load cell
Compression force （EN）15±0.1KN
（ANSI）1000±50 —— 10000±50lbs
Compression speed stepless speed regulation
Unit kg, N, and LB can be switched
Pressure shows resolution 1/10000
Maximum load 500kg
Other features include upper limit protection and peak retention, which can automatically shut down
Volume 712×330×828mm
Weight 115kg
Send product request
Other supplier products
 |
Glove cutting resistance tester | Product Information: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure ... |
 |
Automatic freezing point pour point cold tester/ Freezing Point Tester/ Cloud Point Measurement Instrument/ Low Temperature Property Tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Goggles Puncture Resistance Testing Machine/ eyewear penetration test equipment/ Goggle penetration tester | Introduction： In environments where eye protection is critical, goggles are a frontline defense against hazards. But how do you ensure that these ... |
 |
Impact and Penetration Resistance Testing Equipment for Safety Helmets | Impact and Penetration Resistance Testing Equipment for Safety Helmets - Flammability Testing equipment price quotation - standard Standards: G... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
