Femoral Stem Neck Prostheses Fatigue Testing Machine
Standard
- YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty.
- ISO 7206-6 (International): Defines protocols for evaluating the fatigue strength of femoral head-neck junctions.
- ASTM F2023: Additional compliance for dynamic loading of ceramic femoral heads.
- Adaptive Protocols: Customizable for emerging standards in biomaterial fatigue testing.
Product Advantages
- Electromagnetic Precision: M-Series actuator delivers ±0.1% force accuracy with sub-micron displacement control.
- 10 Million Cycle Endurance: Proven capability to complete ISO 7206-6’s 10⁷-cycle fatigue test without drift.
- R=0.1 Load Control: Advanced servo-hydraulic system maintains specified stress ratios throughout testing.
- Real-Time Failure Detection: AI-driven algorithm identifies crack initiation at sub-millisecond intervals.
- Ergonomic Workflow: 15.6” touchscreen with multilingual interface (English/Chinese/German) and pre-loaded SOPs.
- Modular Test Chambers: Quick-swap environmental pods for simulated physiological testing (-20°C to +50°C).
Product Features
- Electromagnetic Actuator: 5,340 N peak force capacity with 0.001 N resolution.
- Dual-Axis Loading: Simultaneous axial/torsional loading (50 Nm max torque).
- Dynamic Load Control: 1–30 Hz frequency range with programmable waveforms (sine, square, random).
- Thermal Chamber Integration: ±0.5°C temperature stability for accelerated aging studies.
- High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (optional upgrade).
- Safety First: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±5,340 N (11,940 N peak optional) |
| Frequency Range | 1–30 Hz (0.1 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Axial Displacement | ±10 mm (0.1 μm resolution) |
| Torque Capacity | ±50 Nm (0.01 Nm resolution) |
| Temperature Range | -20°C to +50°C (environmental chamber) |
| Data Sampling Rate | 50 kHz (synchronized across 12 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1,500W |
| Dimensions (W×D×H) | 1,200 × 800 × 1,900 mm |
| Weight | 550 kg (including thermal chamber) |
| Noise Level | <70 dB (A-weighted) |
Accessories
- Femoral Neck Test Fixture Kit:
- Self-centering collet system (12/14 mm taper compatibility)
- Laser-aligned loading anvils with wear-resistant coating
- Thermal Environmental Chamber:
- 15L capacity with rapid cooling/heating (10°C/min)
- Corrosion-resistant 316L stainless steel interior
- TestMaster Elite Software:
- Automated fatigue life prediction (S-N/ε-N curve generation)
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.5–25 Nm)
- Specimen alignment gauges (ISO 7206-6 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Temperature verification probe
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure for noise reduction
Send product request
Other supplier products
 |
Automotive Seat Belt Buckle Bending Test Machine | Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restraint ... |
 |
Carpet Dimensional Stability Tester | Standard ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability) ISO 2551(Textile Floor Coverings - Determination of Dimens... |
 |
Vertical low temperature cold resistance testing machine | Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un... |
 |
Hydraulic oil purification and filtration tester | Meet the standard: ISO 16889 ISO 4406 ASTM D7619 ISO 11500 Product Introduction: Hydraulic oil purification and filtration testers are esse... |
 |
KES - FB2 - L Large - scale Bending Tester | Content TheLarge Bending Tester accurately and quickly measures factors related to curvatures in small bending moments (bending hardness and recov... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
